Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Problem with carby again...
Problem with carby again...
Alright, finally got this new motor almost sorted out, carby running and idling nice to, except as soon as i put on the light or fan on etc the idle picks up to alot to high! Any one have any suggestions, already replaced the diode in the wiring loom, makes no difference? Any help appreciated. Cheers.
ahhhh this has been discussed b4
cos i asked the question
some one gave me the answer how to fix it
but i cant rember how to do it . got injection now so i dont need to rember
cos i asked the question
some one gave me the answer how to fix it
but i cant rember how to do it . got injection now so i dont need to rember
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
idle
yeah it is the idle up feature, i sure some one will correct me but i was asjusting my idle with playing with the 2 wind in bolt thing in the front of the carby , it is activated like a vacum advance i think, via a switch.
i sure some one who works on em willl know the wording.
bj
i sure some one who works on em willl know the wording.
bj
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
The idle should go to bout 900rpm or a bit higher when electrical load like lights is placed on it. Get a mate to turn on and off ya lights while ya watch the front of the carby, there will be a little vacum servo that moves a lever when the lights are turned on. on the end of this lever is a screw adjusted pad. Turn this till the high idle comes down to the normal setting.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Who is online
Users browsing this forum: No registered users and 9 guests