where to get round tube..sydney

Post by **thunder** » Sat Dec 18, 2004 7:44 pm

need to know where you guys get your seamless round tube from.
mate rang up one steel and they didnt carry this anymore(w/park).
i got box tube a week ago and had no problems finding it.

Post by **spazbot** » Sat Dec 18, 2004 9:10 pm

most ppl in syd dont ues proper seamless dom as it costs a farken fortune.

Post by **Slunnie** » Sat Dec 18, 2004 11:26 pm

I'm pretty sure Blackwoods carry it.

Post by **Surfection** » Sun Dec 19, 2004 10:45 am

British International Trading

34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email: sales@britint.com.au

DS McCulla & Son

71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545

Post by **Tiny** » Sun Dec 19, 2004 11:05 am

Van Luen (spelling????)

Post by **thunder** » Sun Dec 19, 2004 4:42 pm

spazbot wrote:most ppl in syd dont ues proper seamless dom as it costs a farken fortune.

what r they using then.. he wants tube to make a tray for his lux.

Post by **thunder** » Sun Dec 19, 2004 4:44 pm

Surfection wrote:British International Trading

34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email: sales@britint.com.au

DS McCulla & Son

71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545

thanks jeremy .its for russell .U remember the guy that had the yellow twin cab lux.. now got a single cab on 35s

Post by **spazbot** » Sun Dec 19, 2004 5:11 pm

ppl just use erw or black pipe ase the dom stuff costs like 4x the amount as the other stuff and for a tray id just use 3.2mm wall erw tube

Post by **Surfection** » Sun Dec 19, 2004 8:06 pm

thunder wrote:
Surfection wrote:British International Trading

34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email: sales@britint.com.au

DS McCulla & Son

71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545

thanks jeremy .its for russell .U remember the guy that had the yellow twin cab lux.. now got a single cab on 35s

Yeah i remember Russ, he did an oil delivery for us about 4 months ago, said he had something in the works back then. Why does he want to outlay the $$$ for tube when he could just use pipe ? Is he trying to meet CCDA or other comp rules ? My bender can bend pipe no probs, infact i love bending pipe cause it's much softer than tube so doesn't give quite the arm workout that tube does, but because of the slightly different measurments it flattens out a bit on 90 degree bends, hardly noticable though. You can definatly feel the difference in strength/quality though.

Post by **thunder** » Mon Dec 20, 2004 9:41 pm

Yeah i remember Russ, he did an oil delivery for us about 4 months ago, said he had something in the works back then. Why does he want to outlay the $$$ for tube when he could just use pipe ? Is he trying to meet CCDA or other comp rules ? My bender can bend pipe no probs, infact i love bending pipe cause it's much softer than tube so doesn't give quite the arm workout that tube does, but because of the slightly different measurments it flattens out a bit on 90 degree bends, hardly noticable though. You can definatly feel the difference in strength/quality though.[/quote]
not for comp . maybe go pipe.
when my tray was getting done the engineer i had lined up wouldnt engineer it unless it was at least 2.56mm wall so want it to be strong...

Outer Limits 4x4 Board

where to get round tube..sydney

where to get round tube..sydney

Who is online