Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ cup holders

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

GQ cup holders

Post by CRUSHU »

bought a cupholder from nissan today. Fits in the front part of the console.
part no. 6843032J101 cost nearly $43.00
A must have, so you don't spill your Beam around bumpy corners. 2 self tappers, and it was fitted. I pulled out the 2 little squares of carpet 1st, for a better fit.

mmmm beam........yum!
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Post pics
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

pics too please
Gq ute new built
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

where from, I take it it is a factory part
Ransom note = demand + collage
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

Yepp! They're awesome! Best thing I bought for the interior yet!! :lol:
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

i think they are similar to the ones from supercheap for $2.00
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

My tinnie never leaves my hand.......if it does it is finished.

seriously, pics please

Tiny
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

Is this similar to the standard ones in the console, as for sale in this post here?

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=32579
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

yep, thats the one. makes his console good value.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

in my centre console i have 2 little spots, the small front one has carpet, the back on has old as glue marks.....

i want cup holders :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Buy the part - or the console.
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

the cup holders are great....they are perfect size to fit a wetsuit style stubby cooler in.... that way if you dont have a drink you can put your money or your phone or whatever in them while you go flat out up that hill climb........


i just love em...... so hahahahahahahahaha to anyone who doesnt have them.... :lol: :lol:
www.bolsys.com.au

the original and the best
Top
Posts: 82
Joined: Mon Jul 19, 2004 11:47 pm

Post by Justin_M »

With an MQ center console, if u put 2 600ml choc milk cartons into the box section, u can also fit a can or stubby in there perfectly and its only going to fall over if u roll it.

Us guys with older nissans need to be a bit more inventive :p
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ cup holders

Post by bogged »

CRUSHU wrote:part no. 6843032J101 cost nearly $43.00


Blackburn Nissan have 1 there they are holding for me.
$31.82
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

For other incab additions.... http://www.consoles.com


Tiny
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ cup holders

Post by bogged »

bogged wrote:
CRUSHU wrote:part no. 6843032J101 cost nearly $43.00


Blackburn Nissan have 1 there they are holding for me.
$31.82


just picked it up, $30.... cant complain with that!
Although the cup holders dont look deep (EG almost like a can could fall over), they are more than 1/3rd of the can deep.

Good work dude for finding this one.. Will help heaps with a 5 yr old in the navigators seat with me ... :)
Top
Posts: 454
Joined: Sat Oct 09, 2004 8:26 am
Location: Brissy

Post by The Big Green Meany »

bogged wrote:i think they are similar to the ones from supercheap for $2.00


I found this the simplest and the cheapest , Works for me at $2 ea.....
Top
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Re: GQ cup holders

Post by Chookman »

CRUSHU wrote:bought a cupholder from nissan today. Fits in the front part of the console.
part no. 6843032J101 cost nearly $43.00
A must have, so you don't spill your Beam around bumpy corners. 2 self tappers, and it was fitted. I pulled out the 2 little squares of carpet 1st, for a better fit.

mmmm beam........yum!


Just rang Liverpool Nissan and the guy said the above number is wrong by one digit.

6843032J01 and costs $43.
Maitland Nissan (according to his computer) are the only ones that have one at the moment.

The $30 deal sounds like a bargain
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ cup holders

Post by bogged »

Chookman wrote:.
Part no. 6843032J01 and costs $43.
part no. 6843032J101 cost nearly $43.00
The $30 deal sounds like a bargain

Correct.
Got the box infront of me, didnt even realise the extra 1 in there

Actually the box has it as
Holder Assy-cup
Part #: 68430 - 32J01
Unit list price $38.58
Unit net price $28.93
Sub Total $28.93
GST 2.98
Total $31.80
Top
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Re: GQ cup holders

Post by Chookman »

bogged wrote:Correct.
Got the box infront of me, didnt even realise the extra 1 in there

Actually the box has it as
Holder Assy-cup
Part #: 68430 - 32J01
Unit list price $38.58
Unit net price $28.93
Sub Total $28.93
GST 2.98
Total $31.80


Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.

Thanks

Chook
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ cup holders

Post by bogged »

Chookman wrote:Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.


www.blackburnnissan.com.au I think. they are in Blackburn Melbourne

I have been thinking it could have been old stock, on the shelf for few yrs maybe... they wouldnt be a high moving item.

I'll call them tomorrow and see what I can arrange, might see if we can get 10 of them at a better price... think they could sell easily
Top
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Re: GQ cup holders

Post by Slug »

bogged wrote:might see if we can get 10 of them at a better price... think they could sell easily


Damn right ....I will check my local dealer tomorrow also. Failing that, I would be in for one.

Daniel
Top
Posts: 215
Joined: Mon Aug 09, 2004 9:32 pm
Location: Ipswich

Post by 92mav »

ordered mine today its coming over from WA will be great to finally stop spilling drinks while wheeling :D
GQ TD42, 4" lift, 2" bodylift, 4.6 s, detroit lockers, 35,s t3/t4 plus a turbo,
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

92mav wrote:ordered mine today its coming over from WA will be great to finally stop spilling drinks while wheeling :D


depends on how hard you wheel though :cool:
Gq ute new built
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: GQ cup holders

Post by Screwy »

bogged wrote:
Chookman wrote:Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.


www.blackburnnissan.com.au I think. they are in Blackburn Melbourne

I have been thinking it could have been old stock, on the shelf for few yrs maybe... they wouldnt be a high moving item.

I'll call them tomorrow and see what I can arrange, might see if we can get 10 of them at a better price... think they could sell easily


id be keen too if ya could organise somethin :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

...sounds like a plan, see if we can get a bulk buy cheaper, sounds like most dealers will need to get em in anyway.
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

I made my own holder out of aluminium checker plate. It's flat and screws down under the first little flat section of carpet using the factory mounts but with longer screws and then it comes straigh up on roughly the same angle as the back of your seat. Your can fits in the rearward spot. To stop the can moving sideways, I have an empty stubby holder next to it. A perfect fit!
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

I'm keen if we can do a bulk deal.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

berett wrote:I'm keen if we can do a bulk deal.


http://www.outerlimits4x4.com/PHP_Modul ... hp?t=32921

;)
Top
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

can anyone find a set of cup holders for a GU?
the standard ones are pretty shitty.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests