Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ SWB small wheel vibration.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

GQ SWB small wheel vibration.

Post by Screwy »

Stock as GQ SWB 89 TB42.

driving down the road when at constant speed 60km, 80 kms, 100 kms etc. gets worse as i go faster.
The wheel does a slight back and forth vib of about 1cm side to side when cruising.

doesnt do anything under decelleration / braking nor under acceleration.

did a search and looked in bible but couldnt find anything.

any ideas??

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

just thought id add it only does it when im at really constant speed, and if a wack the wheel over and back sometimes it stops it.

just enough to be annoying really...
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Sounds like a bush type problem.
Panhard, radius arms or TRE maybe.
Panhard bushes factory are good, try here for P/N
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=32378

Radius arm bushes, 80series ones fit. I just got some good 2nd hand ones out of an 80 that was getting csator bushes.

TRE- no idea.
THOUGHT FOR THE DAY....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:Sounds like a bush type problem.
Panhard, radius arms or TRE maybe.
Panhard bushes factory are good, try here for P/N
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=32378

Radius arm bushes, 80series ones fit. I just got some good 2nd hand ones out of an 80 that was getting csator bushes.

TRE- no idea.


dead panhard bushes shake like shit when you brake - or they did on mine..
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

i dont get any vibs under braking or acceleration.
just small constant movement under constnat cruise.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

wheel balance...? steering dampner?
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Swap wheels front to rear.

Bazzle
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Bazzle the rear tyres are about 40 percent but the fronts are near balled....
ive got a new set of tyres at my mates place that i have to pick up so will just chuck the new tyres on.

im going to be doing a 2 inch spring lift in it shortly..... Is the wobble going to get worse?
is there anything i can do to stop this?

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

drag link ends are rooted.

Whilst on firm ground get a mate to push your front tyres left and right and inspect the drag link ends.

Mine were rooted and was corrected when i turned steering left and right.

Put adjustable ones on with HD ends - no more problems

TOM
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

GQ wrote:drag link ends are rooted.

Whilst on firm ground get a mate to push your front tyres left and right and inspect the drag link ends.

Mine were rooted and was corrected when i turned steering left and right.

Put adjustable ones on with HD ends - no more problems

TOM


tom,

ill have a looky see when i get some time tomorrow, thanks for ur thoughts. i did have a breif look today and they all looked alright...
spose only one way to find out.

scrwey
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 340
Joined: Thu Dec 23, 2004 5:02 pm
Location: Canberra

Post by gqswb »

bazzle wrote:Swap wheels front to rear.

Bazzle


I'm with him, it won't cost you anything just to give it ago. Especially if the tyres are bald like you said. Probably hasn't had a balace in ages.
Top
Posts: 340
Joined: Thu Dec 23, 2004 5:02 pm
Location: Canberra

Post by gqswb »

PS. Merry Christmas!

wow 3 posts, just joind the otherday. Got meslf a 11/92 GQ SWB 4.2 petrol/LPG ST. Had it for bout 6 months and before that a tough Lada that i will always have a soft spot for.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

im not going to bother rotating the tyres, im just going to put a new set on it very shortly.

cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 10
Joined: Fri Jul 16, 2004 9:40 am
Location: sydney

Post by GAZ76 »

Panhard rods or wheel balance i ve got a 89 4.2 that did it and had a 95 2.8 that did it even more it was panhards both times also wheel balance on the 95 mod

gaz :P
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

yeh when i get the new rims and tyres ill get em balanced and get an allignment, but may wait till the 2 inch springs are in.
hopeing its not the bushes anywhere....
are they a pain to fit? do they need to be pressed?

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Most wobbles caused by panhard bushes. Do a search . Cost about $16 each Need 2.
Vice to remove and refit.

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 13 guests