Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

UNIMIG welders

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

UNIMIG welders

Post by jasonmcc »

So is the UNIMIG procraft series of welders worth their money. I have spoken to a few people and they agree they are not the best quality welder but they are pretty cheap.

Who owns one? How long have you had it? How good does it work, weld?


What welder would you buy if you had up to $1400.

Thanks

Jason
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

There have been just a couple of threads on here in the past discussing Welders-

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

http://www.outerlimits4x4.com/PHP_Modul ... ght=welder

I noticed some of these threads came from someone familiar to you ;)

Try a search next time before you ask a question that gets asked every month or so :?
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 6 guests