Looking for a second opinion. Have been having troubles with running uphill and acceleration. Doesn't seem to matter if hot or cold. As you sink the foot and get above 2000rpm the engine starts to knock and splutter. Checked timing out, is as the book and am running premium at the moment to see if that fixed it but to no avail. Went out for a run just now. Disconnected the vacum advance same syptoms as with it connected so looks like it's stuffed. Any other thought's ie condensor?
Mechanical advance works fine but running it at revs and disconnecting the vacum no change to timing.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vacum advance?
Moderator: Micka
Yep the vacuum advance can be the culprit.
That the cap off and suck on the vacuum hose. See if the arm in the dizzy moves.
If you need a new vacuum advance , get a change over one from Performance ignitions in Nunawading. Victoria. About $60 from memory. I think they do a mail order as well. lots of Rover owners have used them and are happy.
A Gen new one is about $480 last time I priced one at a dealer.
I'ts the extreeme heat on a rover engine that cooks the diaphram rubber and it punctures. Performance ignitions replaces there's with tougher rubber they told me. Mine has not given me any problems for 3 years now.
That the cap off and suck on the vacuum hose. See if the arm in the dizzy moves.
If you need a new vacuum advance , get a change over one from Performance ignitions in Nunawading. Victoria. About $60 from memory. I think they do a mail order as well. lots of Rover owners have used them and are happy.
A Gen new one is about $480 last time I priced one at a dealer.
I'ts the extreeme heat on a rover engine that cooks the diaphram rubber and it punctures. Performance ignitions replaces there's with tougher rubber they told me. Mine has not given me any problems for 3 years now.
Try it on the one that moves and see if it makes a difference.
On My 96 Disco, There are 2, one has a rubber plug over it, this is the one closest to you viewing engine from front.
The vacuum hose is connected to the other one.
Take your distrib cap off, rotor and plastic,/ bakelite cover plate off, (3 small screws)
Then suck on the hose and see if the lever 'Pulls back' and rotates the base plate.
( I think there are 2 connectiions on the advances as some older vehicles had one form deceleration or something)
PS> Have you tried sucking on the hose at the same time as having the timimg light connected, If the advance is working you will see the timig advance easily when sucking?
Try it on both and see it if advances.
On My 96 Disco, There are 2, one has a rubber plug over it, this is the one closest to you viewing engine from front.
The vacuum hose is connected to the other one.
Take your distrib cap off, rotor and plastic,/ bakelite cover plate off, (3 small screws)
Then suck on the hose and see if the lever 'Pulls back' and rotates the base plate.
( I think there are 2 connectiions on the advances as some older vehicles had one form deceleration or something)
PS> Have you tried sucking on the hose at the same time as having the timimg light connected, If the advance is working you will see the timig advance easily when sucking?
Try it on both and see it if advances.
Who is online
Users browsing this forum: No registered users and 7 guests