Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ADVICE ON EXHAUST FOR GQ MODS

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 27
Joined: Wed Mar 05, 2003 5:57 pm
Location: NOWRA NSW

ADVICE ON EXHAUST FOR GQ MODS

Post by pete's GQ »

:( I need to know if I can mod my 4" mandrel exaust. My problem is that the exhaust diameter is to large inbetween the chasis rail and the gearbox to fit my pto, I know the turbo gets in the road of the shaft but I have solved this by having the pto drive a hydraulic pump and motor for the winch.
What i thoght I could do is put in 6" section and then flatten it to 3". Would this creat a tuned cavit and therefore create a back pressure? :?:
ANY OTHER METHOD WOULD BE WELCOMED.

THANKS.
1994 GQ TD4.2 SAFARI TURBO
1"SUSP LIFT
Top
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Contact:
Contact roly

Post by roly »

why 4" ? looking for the rice effect?

just repalce the whole lot with 3" mandrel straight thru
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Top
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

unless you are running around 17-20psi boost and have the intercooler etc - run 3" mandrel - you will get all the power you need then!!

also not so ricey......

Also easier with the police too - you'd be loud as!!!!!
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest