ok how in the, real world, do you all think these ratio's will be for all types of 4x4ing. dd on 32's off road 34-35's. as i haven't done alot of hardcore offroading they are only numbers to me.these are approx, but close enough:
high range low range
1st: 21-1 75-1
2nd: 12-1 43-1
3rd: 8-1 28-1
4th: 6-1 20-1
5th: 4-1 15-1
reverse 20-1 69-1
all thoughts/ideas appreciated
serg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gear ratios for my 110
Moderator: Micka
I take it this combo is: R380, LT230 with MD low range gears (and 1.2:1 high), and 4.7's.
I think that 75:1 will be a good crawler gear but too low for a lot of things, so you will do most of your 4x4ing in 2nd and 3rd low, however I think that on 35's you may find yourself wishing for a gear between 1st and 2nd low. However if you have a tweaked Tdi it should still be able to pull the 35's at all times in 2nd so should work quite well.
I think that 75:1 will be a good crawler gear but too low for a lot of things, so you will do most of your 4x4ing in 2nd and 3rd low, however I think that on 35's you may find yourself wishing for a gear between 1st and 2nd low. However if you have a tweaked Tdi it should still be able to pull the 35's at all times in 2nd so should work quite well.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
5th gear will only be 16% lower than standard. i don't have a tacho so i couldn't tell you what revs i'm doing now. basicly 90% of my dd is done with a 1.8 tonne dual axle tailer. normal gearing is not that good especialy 1st gear and reverse, on steep hills i start in low range and double shift into high on the move, not that smoothly all the time either!
serg
serg
Maggot4x4 wrote:Will those 4.7's put up with long term stress of towing that weight all the time?
The rear is a salisbury (Dana 60) so could probably tow 8 tonnes all day without problems. The front R&P may eventually have issues, depending on which one is used and how much it is abused offroad.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 8 guests