Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra CV diagnosis

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

Sierra CV diagnosis

Post by P_Byrne »

Hey all,

Is there an easy way to confirm a busted CV, without having to pull it out?

Broke it on a run in the Glasshouse Mts last weekend... :cry:

Cheers,

Paul
90 WT Tin Top - Stock noisemaker and gears :(
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

You can just tell, there are many simpltoms, clicking, crunching, rattling, a rash
yeshemesh
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

bigsteve wrote:You can just tell, there are many simpltoms, clicking, crunching, rattling, a rash


us hearing deficient types just look out the window, see which tyres dragging, locking up in reverse, or not turning when booted, etc. And you can usually feel a tug on the steering in the directuion of the busted one.
Its usually the short side that breaks, tho mine has done one of each.
Its time to look at both, anyway, as they probably both need servicing..Its not real safe driving with busted cv still in place, as broken bits can grab the steering, with dire consequences...christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

Post by P_Byrne »

Probably a silly question, but can I pull it out and drive around in 2wd till I find a new one?

Obviously have to drain diff etc -would this be ok in the short term?
90 WT Tin Top - Stock noisemaker and gears :(
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

P_Byrne wrote:Probably a silly question, but can I pull it out and drive around in 2wd till I find a new one?

Obviously have to drain diff etc -would this be ok in the short term?

I removed my broken cv, drove round for 3 weeks before I fitted another, and I did not drain the oil, and only lost a bit out thru the hub.
So it should be fine, certainly safer than leaving it in. christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

Post by P_Byrne »

Cheers Christover,

guess what I'm doing today!
90 WT Tin Top - Stock noisemaker and gears :(
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

P_Byrne wrote:Cheers Christover,

guess what I'm doing today!


make sure you get all the broken bits/balls out, usually in the oil in bottom of hub...some very sharp, so be careful, christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

P_Byrne wrote:Probably a silly question, but can I pull it out and drive around in 2wd till I find a new one?

Obviously have to drain diff etc -would this be ok in the short term?


Why not unlock the hubs and leave it in 2WD

Does the same thing
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

No Idea wrote:
P_Byrne wrote:Probably a silly question, but can I pull it out and drive around in 2wd till I find a new one?

Obviously have to drain diff etc -would this be ok in the short term?


Why not unlock the hubs and leave it in 2WD

Does the same thing


Its not real safe driving with busted cv still in place, as broken bits can grab the steering, with dire consequences...christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

christover1 wrote:
No Idea wrote:
P_Byrne wrote:Probably a silly question, but can I pull it out and drive around in 2wd till I find a new one?

Obviously have to drain diff etc -would this be ok in the short term?


Why not unlock the hubs and leave it in 2WD

Does the same thing


Its not real safe driving with busted cv still in place, as broken bits can grab the steering, with dire consequences...christover


How?

If the free wheeling hub is unlocked, the axle has no connection to the wheel at all, and if the transfer is in 2wd the tailshaft does not turn.
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

nothing to do with turning axles, cv's and tail shafts etc....the pieces broken off the cv can wedge in the knuckle and prevent steering from functioning...also broken pieces can grab at the knuckle casings causing damage, making seals not fit well etc....most people I know who have driven with busted cv still in vehicle have had to stop and remove it, due to sudden loss of steering.....you can be lucky and have no bits actually fall out, but I don't like to risk it..with hubs unlocked, yes your right, nothing is spinning, its just a steering issue....
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

Broke mine yesterday and yes you do lose steering and yes your better off removing it.
4 Pot Screama
Post Reply

Who is online

Users browsing this forum: No registered users and 74 guests