Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

axel wrap !!!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

axel wrap !!!!

Post by china »

has any one experianced this in a gu or gq ?
cors it just happened to me :roll:
or did something else cause it ? lower arm (bent) went down n drive shaft went up ? to much torque! :P
gu ute (big diff) 36"pedes unlockd 4.8s
any thorts ? tyres cant touch the lowers can they, cors they move in situ??
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Assume you mean rear lower arms??

Seen it happen a few times All it takes is a slight hit and they bend up. Seen pinions snapped off too. After market arms are the way to go. Mal Leslie, Cheezy etc. Fairly priced.
Better than trying to repair your own or using a CB fix.

Bazzle
Top
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

arms

Post by china »

yep rears, would it be worth while to weld a spine like brace top n bottom the full length of a standard arm? or still not enuff
does that make sence? im not guna try to repair old ones!
cheers
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Stock arms are only about 2.5mm wall seamed tube, When I bent one of Dad's stock arms we got Cheezy to fit some of his H/D replacements (in purty Blue) at the time (Little while ago now) they were only about $200 fitted, may have gone up a bit now. Haven't had a problem since.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Dont modify standard arms. Get aftermarket. Many places sell them.
Its not the right thing to do.

Bazzle
Top
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

arms

Post by china »

will do , thanks for the info guys.
cheers
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests