Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spring Rubbers?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 172
Joined: Thu Dec 19, 2002 9:28 am
Location: Broome

Spring Rubbers?

Post by sideshow »

Just wondering if anyone has tried using something other than a genuine Nissan spring rubber as a substitute. Nissan want to charge me $31.45 a piece x 4 = rip off!

Thanks,
Pete
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

If they are rooted and need replacing I prolly wouldn't bother.

Or get some spring spacers for around the same price and get a lift thrown in! :cool:

where are you?

Give engineered urethanes (Brizzy) or someone similar a call and see what they have available.

cheers
Brian
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Spring Rubbers?

Post by bogged »

sideshow wrote:Just wondering if anyone has tried using something other than a genuine Nissan spring rubber as a substitute. Nissan want to charge me $31.45 a piece x 4 = rip off!


$8 each isnt that bad for somethin' that will last 12 years is it?
Posts: 172
Joined: Thu Dec 19, 2002 9:28 am
Location: Broome

Post by sideshow »

$8?

$31.45 x 4 = $125.80
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sideshow wrote:$8?

$31.45 x 4 = $125.80

owned, misread it as all up..

Ok, you are correct.

What about the Spring spacers that ARB sell? could they be a substitute?
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

I'm using the 30mm engineered urethane spacers for the same price which give me a lift as well. No complaints from me. One thing to watch, with some higher lift springs, the coil may bind prematurely with the 30mm spacer now fitted. Not a problem with my 2" coils.
Posts: 172
Joined: Thu Dec 19, 2002 9:28 am
Location: Broome

Post by sideshow »

Thanks Mark,

Not actually after lift as i have 4" coils in just after something to stop the constant metal on metal squeek
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Spring Rubbers?

Post by bogged »

what about any suspension place, you would think that they would be a standard item for any spring.... or repco/autobarn etc
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: Spring Rubbers?

Post by Tiny »

bogged wrote:what about any suspension place, you would think that they would be a standard item for any spring.... or repco/autobarn etc


What bogged says, seems a bit pricy for what they are, but the noise will drive you insane so it wouild prolly be worth it
If the above post did not offend you in any way please PM me so I can try harder!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest