Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Welding spring perches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Welding spring perches

Post by elgordomuygrande »

Hey all,

This weekend I'm gonna make some new spring perches for my Daihatsu F20 for a spring over conversion. I have some 50mm square tube in the shed but the problem is that due to the narrow width of th axles, I'll have to place one side of the perches on the front axle on the diffhousing, which is cast. I'm not a pro welder so I'm not sure what's the best way to weld the perch to the housing and prevent overheating/cracking.

Got tips??

Cheers Ron


Image
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest