List of Engineers Most states listed

[MissDrew]

Page 1 (11 pages)
Engineering Signatories
IMPORTANT NOTICE
The Engineering Certificate Scheme (ECS) described in this information sheet is being replaced by the Vehicle
Compliance Certification Scheme (VCCS). During the transition period from ECS to VCCS, signatories on this
list (VSI No. 15) will be allowed to continue to issue ECS certificates.
A list of VCCS accredited signatories (VSI No. 48) will be posted on the RTA website when available.
This information sheet contains a list of persons with experience in automotive design and standards who have
indicated that they are available for consultation. They are familiar with vehicle construction requirements in NSW
and, for a fee, will provide advice to owners and vehicle constructors, and undertake technical assessments and
issue engineering certificates. However, in publishing this list, the Roads and Traffic Authority (RTA) does not
endorse their services nor does it take any responsibility for the quality of their work.
For the purpose of registration the RTA will only accept certificates from recognised signatories. Vehicle
constructors and owners intending to engage the services of a signatory must establish from the signatory if
the RTA will accept their certificate for the scope of the proposed modifications. If uncertain as to whether
the signatory is recognised by the RTA to certify the proposed modifications you should ring the RTA
Technical Enquiries on 1300 137 302. Please consult with your signatory to see if the authorisation covers
your particular areas of modifications. It is also advisable to ascertain the fee arrangements and whether the
signatory carries “ Professional Indemnity Insuranceâ€

[Elmo]

now that WILL be useful, thanks mate

[MissDrew]

Before anybody goes ringing anybody on the list make certain you read the bit at the top.

[Busiboy]

GRDUSIAK Richard
R P & D A Grdusiak Pty Ltd
Cnr Castlereagh Road
& Coreen Avenue
PENRITH
NSW 2750
E: richard_grdusiak@hotmail.com
List Of Engineering Signatories
Page 4 Vehicle Standards Information No 15 Rev 11, Dec 04
Sydney metropolitan & environs (continued)
Work Category Name & Company Address Telephone/Fax/
Mobile number
Prof.
M/ship PC LV HV MC
P: (02) 9631 5016
F:
M:
IE Aust
!
!
!

Don't bother taking a SOA to this guy, I rang him and he told me he doesn't like them and won't do them and to find someone else. Shame he is 1 min from where I am.

[Eddywelder]

WHITTLE James W
West Trans Equipment
2 Cunneen Street
MULGRAVE (near Windsor)
NSW 2756
E:
P: (02) 4632 7459
F: (02) 4632 7469
M: 0419 291 221


I used to work for West-Trans Equipment and they only engineer heavy trucks , they do not do engineering on 4wd cars and their modifications...
just thought I would mention this to save some confusion....
Eddy

[diesel028]

[quote="Guts"]Page 1 (11 pages)
Engineering Signatories
IMPORTANT NOTICE
The Engineering Certificate Scheme (ECS) described in this information sheet is being replaced by the Vehicle
Compliance Certification Scheme (VCCS). During the transition period from ECS to VCCS, signatories on this
list (VSI No. 15) will be allowed to continue to issue ECS certificates.
A list of VCCS accredited signatories (VSI No. 48) will be posted on the RTA website when available.
This information sheet contains a list of persons with experience in automotive design and standards who have
indicated that they are available for consultation. They are familiar with vehicle construction requirements in NSW
and, for a fee, will provide advice to owners and vehicle constructors, and undertake technical assessments and
issue engineering certificates. However, in publishing this list, the Roads and Traffic Authority (RTA) does not
endorse their services nor does it take any responsibility for the quality of their work.
For the purpose of registration the RTA will only accept certificates from recognised signatories. Vehicle
constructors and owners intending to engage the services of a signatory must establish from the signatory if
the RTA will accept their certificate for the scope of the proposed modifications. If uncertain as to whether
the signatory is recognised by the RTA to certify the proposed modifications you should ring the RTA
Technical Enquiries on 1300 137 302. Please consult with your signatory to see if the authorisation covers
your particular areas of modifications. It is also advisable to ascertain the fee arrangements and whether the
signatory carries “ Professional Indemnity Insuranceâ€

[Tiny]

Most Usefull tks

[DIRTY ROCK STAR]

Guts well done mate!!!!!!!!!!!!!!

especially as it was only recently the RTA moved everything on the inter and intra net. so good work, alot of people wil lfind that useful.

[MUSS]

heys guts what about lindsay stone up here in townsville?

[MissDrew]

heys guts what about lindsay stone up here in townsville?

Mate that only a cut and paste from the RTA NSW site, so ask them what about Lindsay.
I haven`t had a good look at the names in the list but the quick look I did have I didn`t notice the local Albury area engineer there.


If anybody knows of an engineer that isn`t on the list then just simply add his details to this thread.

[HeathGQ]

JENKINS Col W
Col Jenkins & Assoc.
82 Jubilee St
MACLEAN
NSW 2463
E: Coljenkins@iinet.net.au
P: (02) 6721 0222
F: (02) 6721 0111
M: 0427 210 222
IE Aust

This guy is a geotechnical consultant, not mechanical.

[Busiboy]

So he can engineer the rocks not the car?

[DamTriton]

So he can engineer the rocks not the car?

Bloody rockstackers.........

[HeathGQ]

So he can engineer the rocks not the car?

Bloody rockstackers.........

thats about it..... smart a@@

[revin]

This would make a perfect sticky to be at the top of the page. If a Moderator see`s this could they put it there would be a shame to see such good useful information get lost in the pages on here. Just my suggestion.

Cheers
Michael

[rocknferoza]

CROSS Ray
Ray Cross & Associates
83 McKenzie Road
ELTHAM (via Lismore)
NSW 2480
E:
P. (02) 6645 2637
F: (02) 6645 3175
M: 0418 654 192
IE Aust
!
!
!
!

If anyone is after an engineer on the gold coast or northern NSW Ray Cross is the guy to speak 2. He does engineer certs for both NSW and QLD. He was the guy who approved my rear coil setup

[JK]

Mullen Automotive Engineering

Athol Mullen
BE MIEAsut CPEng AM.SAE.A MIAME
24 Newcastle St
Cardiff
2285

PH/Fax 02 4956 8030
Mob 0414 685 537

[revin]

Mullen Automotive Engineering

Athol Mullen
BE MIEAsut CPEng AM.SAE.A MIAME
24 Newcastle St
Cardiff
2285

PH/Fax 02 4956 8030
Mob 0414 685 537

Athol no longer does Engineer certs was a top person to deal with but IHLE Werner is a former employee of Athols

[high n mighty]

This would make a perfect sticky to be at the top of the page. If a Moderator see`s this could they put it there would be a shame to see such good useful information get lost in the pages on here. Just my suggestion.

Cheers
Michael

I was gunna post the exact same comment as yours mate


Except with more spelling errors

[JK]

Mullen Automotive Engineering

Athol Mullen
BE MIEAsut CPEng AM.SAE.A MIAME
24 Newcastle St
Cardiff
2285

PH/Fax 02 4956 8030
Mob 0414 685 537

Athol no longer does Engineer certs was a top person to deal with but IHLE Werner is a former employee of Athols

Bummer.

He did my truck. And I agree, great guy to deal with.

[Busiboy]

should sticky this one

[Roctoy]

Athol no longer does Engineer certs was a top person to deal with but IHLE Werner is a former employee of Athols

Heard a rumour that Werner wont engineer 35's or body lifts anymore.
ask HUNTERLUX.

[BOGAN V8]

correct werner will not do body lifts or 35s on a lux..

He is also not a good engineer to use ( sorry chris) told KRAWLA he would do his car even came out and did a progress report, when it came time to do it got the car up to him and then he changed his mind and said he wouldnt touch it.......

[Roctoy]

correct werner will do body lifts or 35s on a lux..

He is also not a good engineer to use ( sorry chris) told KRAWLA he would do his car even came out and did a progress report, when it came time to do it got the car up to him and then he changed his mind and said he wouldnt touch it.......

no appologies needed dave.
peoples.
keep your 4wd's away from TIC engineers they are a rip off and will dick you around no end!

there i said it.

lucky my next project will never need engineering hey!

[RaginRover]

This would make a perfect sticky to be at the top of the page. If a Moderator see`s this could they put it there would be a shame to see such good useful information get lost in the pages on here. Just my suggestion.

Cheers
Michael

Added this to the FAQ and a link to this thread

Tom

[revin]

Glad i havent had to get anything engineered for a while .Sorry i didnt know Werner was no good .

I dont know the name of the enginer this place uses but if you need one try climax suspensions ( www.climaxsuspension.com.au ) im pretty sure he can orginase a engineer but its all done at his work shop in Thornton.Hope this is more helpful

[ozy1]

SIMONS David A
Auto Avia Design Pty Ltd
107 Gipsy Street
BANKSTOWN AIRPORT
NSW 2200
E: david@autoavia.com.au
P: (02) 4655 9440
F: (02) 4655 8687
M: 0412 559 440
IE Aust


Also, the above dude, will not Engineer 4wds, he said my GQ with 6" lift is way too high, and i wasnt even there to talk about the GQ,

He will do Engine transplants thou, but not if you have modded suspension,

He s also looking to get out of the automotive side if the RTA bring in there new Regs later this year,

[mickyd555]

....................DIG..............


i rang every QLD number there, some had no answer and the ones that did answer were wrong numbers.

can anyone let me know of someone i can talk to about modifying my patrol and making sure its legal.......

[-Scott-]

The original list is over a year out of date, and a little hard to read. It would be nice if we had state by state posts, and some volunteers to keep them updated.

Anybody want to volunteer to take a state?

Scott

[MissDrew]

I used, IHLE Werner and didn`t have a problem with him. From the 1st phone call to him till I had the report in my hand was only about 2 weeks.

He also called into my house here in Albury and looked at it on his way threw at about 10pm one night, then he hand delivered the report on his next trip threw Albury and that was at 8am one morning.