Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

No oil pressure at start up

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Thu Mar 20, 2003 8:29 pm

No oil pressure at start up

Post by swampy »

Hi i have an hj47
just gave the old girl an oil change + filter and now in the morning
on start up no oil pressure engine will run for 3sec and stop
restart second time have oil pressure all is ok
replace oil and filter and same problem if as the oil is draining out of the oil filter over night never has this prob before
any idea what wrong

just got and toyota filter to day will try that on the weekend

the two filter i use were valvoline and rycoh :D
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

What sort/weight of oil??

How old/worn is the engine?
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 4
Joined: Thu Mar 20, 2003 8:29 pm

Post by swampy »

castrol 15 w 40

260,000k
engine running fine
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

I used to run Penrite diesel(25/60) in the 2H, & didnt have a prob except in very cold mornings. 10deg & lower.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 4
Joined: Thu Mar 20, 2003 8:29 pm

Post by swampy »

i try the new filter on the weekend
if no good will try Penrite diesel(25/60
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

very cold mornings. 10deg & lower.


HaHaHa, we are lucky to get a temperature over 10deg down here in Tassie.

Very cold morning for us are around 2 or 3 deg.


nick :D
Top
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Hey, cmon. That was when I was in Townsville, and that was bloody freezing :!:
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

does the filter on the 2H point up or down? if the top of the filter points up, did you get a filter with an anti-drainback valve?

have you checked your running oil pressure to make sure it is up to spec?

I'd go the penrite HPR premium diesel oil, it is pretty good, if I bit thick. also go the factory oil filter, the toyota filters are tops.

cheers

Brian
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

common for toyota diesels

my 2h has always stalled first go and then runs fine, so has my 3B, just give it about 800-1000rpm (idle it up a bit) for a few seconds right when you start it and she'll not stall and be fine!!

show us pics of your truck!!
hands and mums dont count!!!
Top
Posts: 4
Joined: Thu Mar 20, 2003 8:29 pm

Post by swampy »

thanks for the info guys fitted the toyota filter and all ok now :D
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 6 guests