Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tyres again

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 105
Joined: Mon Mar 01, 2004 9:22 pm
Location: Brisbane

tyres again

Post by Jimmy L »

Hi,
Anyone know the largest size of All terian (proberly BFG) tyre that will fit a stock 2001 Pajero. Also if I gain 1.5 -2 inch through a suspension upgrade can I also put larger size tyre. I would like to know the maximum size. Thanks
J
89 Narrow CracK Feroza EL- X
2001 NM Pajero Exceed 3.5V6
Coming Soon 2010 Defender 90
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Hi Jimmy

People in the Qld Mitsubishi Club are running 285/75-16 (33") on NM Pajeros, but I'm not sure about suspsension mods, and they also need 8" wide rims. 265/75s (32") fit the standard 7" rims with no problems.

Cheers,

Scott
Top
Posts: 38
Joined: Mon Aug 30, 2004 7:40 pm
Location: Boronia Heights Qld

Post by Fatpaj »

Jimmy,

I have fitted 32" Mongrels with the old white steel rims (off NH) with 3"lift they just hang past the guards (looks great) some times just grab the flares but no drama, I think with std supension 32" (AT) would be max
have fun.

Marty
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

NH wheels have offset 2-3" less than Gen 3s require. This has increased your track, and is probably the reason you're clipping your guards. Wheels with the correct offset (few and far between) should be better.

Cheers,

Scott
Top
Posts: 105
Joined: Mon Mar 01, 2004 9:22 pm
Location: Brisbane

Post by Jimmy L »

Thanks,
It would be nice to put on bigger tyres but I don't want to go changing rims and throw the odo out of whack so it looks like 265/75. Also I like the balance and handling etc so I don't want to over modify especially when my missus has to drive it around (if only I could make her drive her own 4by). Does anyone know some simple mods that can be done and/or suggest a build order. Heres my plans for it:
Tyres & Suspension
Exhast upgrade(extractors)
Bullbar
Snorkel
Remove rear seat for more below floor storage.
Cheers
J
89 Narrow CracK Feroza EL- X
2001 NM Pajero Exceed 3.5V6
Coming Soon 2010 Defender 90
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

I know a dude with an NM with a custom 3" suspension lift running 33"s (skinny) BFG AT's on the factory alloys with no rubbing at all. I think they are a 285/75/16 which measure out to 32.9x11.3".
I just luv my "clacker Jabber"
Top
Posts: 33
Joined: Tue May 31, 2005 6:28 pm
Location: Athens,Greece

Contact:
Contact vpaj

Post by vpaj »

Can we have more info about the 3" NM suspension lift?
www.nomad.gr
2000 NM 3.5 V6
+2" ToughDog
Come up 9000
Custom steps and rear bumper
Top
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

yes plz any more info on biger than 2i lifts for nm/np pajeros?
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Top
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

265/75's are a good size tyre that will fit on standard alloys.

If your still begging for more, then jump to the 255/85. Not too many manufacturers cover this size, but BFG, Maxxis and a couple of others do.
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

Post by Grantw »

The set up I used on my 2007 Swb was:

Lovells H/D Springs allrounds (CFR31HD and CRR31HD??? Memory shot)
Lovells Struts and rear shocks.

Total lift when new was 85mm and settled to 70mm after some months.
Great setup and would recommend highly.

Able to run 285/75/16 (33x11.5) without any rubbing.

Can be done and works well.
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

Post by Grantw »

Image
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 30 guests