Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

jap importers

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

jap importers

Post by bazooked »

any good cheap jap importers around the east way? in possibly after a baleno 1.6 efi or vit depending on price, also mud4b can ya get these? and how much?.

thanks graeme.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

i can get these but as you said its getting hard to find them at a decent price.

ill see what i can find for you tomorrow..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

If Melbourne is east enough :)
I got my jap import 1.3 swift/barina from >>>RE engine p/l
1800 066 179 toll free or 03 9720 4433 or FAX 03 9729 4989
cost was $850 self fitted. 17 Michellan crt Bayswater vic 3153...

another supplier is Engine Wholesalers 5/176 Canterbury Rd Bayswater Vic 3153...Phone 03 9729 6012
FAX 03 9729 6055
enginewholesalers@hotmail.com
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

How are these better than original ie more power or injection just before you start going of remember im new to zuks come from the world of Patrols
Top
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

hmm

Post by benjamin78au »

okay quick question ? i hate to hijack thread, but when you get a imported 1/2 cut, can you specify to include just behind the front doors, so u can get seats and gearbox? as wouldn't mind some one getting a 1/2 cut so i could look at grabing some gti seats as in nth qld they scarce.
Or am i better off approching the importers direct? well 2 cents and a free bump

bj
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

injected, more power and torque, plus the baleno has a lower injector manifold, so more room under ur bonnet.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Re: hmm

Post by mud4b »

benjamin78au wrote:okay quick question ? i hate to hijack thread, but when you get a imported 1/2 cut, can you specify to include just behind the front doors, so u can get seats and gearbox? as wouldn't mind some one getting a 1/2 cut so i could look at grabing some gti seats as in nth qld they scarce.
Or am i better off approching the importers direct? well 2 cents and a free bump

bj



NO YOU CANT.most of these are already cut over in japan,they then contact the importer to see if they want them..

you could try to make them find one for you though..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Sounds like the way to go will it bolt straight up the the original bell houseing how much
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

1.6 needs bellhousing mods.
as for seatsdepends who cuts it ,we normally get them at work.
We have just got a v6 vitara f/cut,more engs & f/cuts coming soon as we get time to go.
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

hey drew let me no wat u got in the 1.6 range and how much..
thanks graeme
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Drew were the hell do you work any how
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

TJ motor imports,
we do engs,cuts, conversions all the time.
just low on zook stock for now,need to catch up on the big list of work to do then its off to japan for a buying trip.
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

That's good to know.

So how much roughly for the 1.6 EFI on your books Drew?
Top
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

or a cultus gti frontcut...
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Dude even though I could never afford it…………. How much is the V6 front cut?

Would be a good motor for the buggy
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 286
Joined: Fri Jul 23, 2004 11:47 pm
Location: ex perth now south of brissy

Post by Drew »

the v6 front cut is $4400 complete or $3300 for eng box wiring computer & everything to make it run.
sorry i can't give prices on stock we don't have yet as prices in japan fluctuate a fare bit,i'll put up a list of whats coming when we get back.
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

ouch

but yeah mate keep us posted on the prices - would really appreciate it

cheers
Top
Posts: 3
Joined: Mon Feb 07, 2005 4:56 pm
Location: brookvale

engines

Post by tim stewart »

speck to 4play 4wd in vic he can do 1.6efi convision dual transfer as well and coil suspension mods :)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest