Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lightforce breather kits .. those who never received, pm me.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1234
Joined: Thu Mar 06, 2003 12:23 pm
Location: i do not wish to offend... take me with a grain of salt... life is too short to worry about me;)

Lightforce breather kits .. those who never received, pm me.

Post by AVGAS_502 »

Sorry guys my mail box cacked itself under my old signature so no i wasnt giving anyone the cold shoulder... but lost all contact details of those that i hadnt despatched.

So... one last offer to LF owners with lights with alloy globe holders and premoulded pilot hole in the rear of the arm. This will give you the perfect light for mullet herding... (and no that isnt billy ray cyrus)

PM me and I'll try and get them out this week... apologies to those who are still waiting... I will have to cap this offer at the first dozen though.

Peter Culley.
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yeah I still haven't recieved mine yet Pete................


Cheers, Frank.
Posts: 1234
Joined: Thu Mar 06, 2003 12:23 pm
Location: i do not wish to offend... take me with a grain of salt... life is too short to worry about me;)

Post by AVGAS_502 »

Ok i have despatched 10 with 2 more on offer and then that is it. Kits will then be available for around $15.00 dollars from LF stockists.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

did u get my PM Frank ??
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yeah Bruce dropped my kit off at work today but I missed him- thanks.

Hypo, no mate nothing there dude ?


Frank.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

doh Frank i meant 2 say Bruce but i was reading the rong post :roll:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Bitsamissin wrote:Yeah Bruce dropped my kit off at work today but I missed him- thanks..



Nobody knew where you was...
Send the globes on to Avgas will ya....

enjoy.
had more mails this week for more people askin for cheap lights...
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

Hey guys, just reading the post and got a question. I've just recently purchased a set of 240's and really don'y know if they have a breather kit with them. Just wondering if I need the kit for the 240's and if so where is the closest Lightforce dealer near Warragul (ViC).

Thanx in advance for the info.
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »

LEXX wrote:Hey guys, just reading the post and got a question. I've just recently purchased a set of 240's and really don'y know if they have a breather kit with them. Just wondering if I need the kit for the 240's and if so where is the closest Lightforce dealer near Warragul (ViC).

Thanx in advance for the info.


They look pretty simular to Diff Breathers or should I say it is the same principle.

A bit of drilling is required and some sealing.

If you have plastic tubes running from the back of your lights and run up into your engine bay you have em.

By the way I would like to thank LightForce for their excellent after sales service.
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 435
Joined: Fri Jan 24, 2003 8:37 am
Location: Ferntree Gully, MELB

Post by LEXX »

Thanx mate, nope no holes or anything like that coming out of the back of them so I presume that they don't have them. Will have to source some me thinks.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests