Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TJ wrangler cooling question

Tech Talk for Jeep owners.

Moderator: GUtripper

Forum rules
Post Reply
Posts: 10
Joined: Wed Jan 12, 2005 5:54 pm

TJ wrangler cooling question

Post by mvanbasten9 »

:roll: I've got a 97 TJ. I've put a new radiator and water pump in it. New thermostat and radiator cap and 50:50 mix coolant. On a hot day using air con it will climb above the 100 mark on the temp guage. When i stop the coolant boils in the overflow tank. I never had this happen when everything was stock. Anyone had this? Most importantly has anyone got a solution??????????
Top
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Contact:
Contact CJer

Post by CJer »

Hello mvanbasten9

Welcome to OL have you had the block flushed out as well. If you haven't there may well be a blockage inside of the water passage. Also try turning the heater on to see if that stops it boiling. If it does impove this will show that there is insuficent cooling capacity aval and there may be a problem with the Fan.

Hope this is of some help

Jamie
Top
Posts: 10
Joined: Wed Jan 12, 2005 5:54 pm

Post by mvanbasten9 »

Yeah the whole system has been flushed. I thought maybe there was a problem with the fan but it seems to be working fine. is there some type of cooler grade thermostat i could use?
Top
Posts: 12
Joined: Mon Jan 10, 2005 10:32 pm
Contact:
Contact nofear

Post by nofear »

Does the temp gauge go into the red? If not, then I wouldn't be too concerned. I've had the water in the overflow boil as well, but while the guage is still on 100. (97 TJ)

Admittedly I don't have any coolant in at the moment (yeah, yeah, I know) but if it's not "overheating" then why worry?
Top
Posts: 137
Joined: Fri Feb 27, 2004 10:22 am
Location: Perth, Australia

Contact:
Contact CrazyNuts

Re: TJ wrangler cooling question

Post by CrazyNuts »

mvanbasten9 wrote::roll: ...and 50:50 mix coolant


There's your problem. Too much coolant solution. The more solution you put in the LESS effective the cooling system. You need a mixture of 1:3 then you won't see your needle go above 100 deg celc.
Top
Posts: 10
Joined: Wed Jan 12, 2005 5:54 pm

Post by mvanbasten9 »

Cool thanks for that. Manufacturers handbook recommended 50:50 but i'll give 1/3 a try. Thanks heaps.
Top
Posts: 137
Joined: Fri Feb 27, 2004 10:22 am
Location: Perth, Australia

Contact:
Contact CrazyNuts

Post by CrazyNuts »

mvanbasten9 wrote:Cool thanks for that. Manufacturers handbook recommended 50:50 but i'll give 1/3 a try. Thanks heaps.


50:50 :?: :?: :?:

Maybe if you live in bloody Antarctica where it's never warmer than -10c
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

Did you bleed the systerm properly?
the collant miX wont really make much of a differance.

it souns lik you have an air lock that needs to be bleed out
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 68
Joined: Wed Dec 04, 2002 7:16 pm
Location: Morningside Queensland

Post by Northcoast Wrangler »

when u say when it was stock, what modifications have u done to the tj is it auto or manual
Top
Post Reply

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 2 guests