I have just converted an A/C compressor so I can use it as my on board comp, but i am having troubles as to where to mount the thing....
Where have others mounted theirs on their 4.5 (1fzfe)????
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Compressor Mounting on an 80?
Moderators: toaddog, Elmo, DUDELUX
on the diesels, you can mount one directly on top of or below the existing air cond compressor, by shifting the whole shebang down a bit, not sure on the petrol motor though.
Maybe Endless Air have a kit for it? probably $$$ but if your time is worth anything to you then probably cheaper than stuffing around trying to make it fit.
Maybe Endless Air have a kit for it? probably $$$ but if your time is worth anything to you then probably cheaper than stuffing around trying to make it fit.
Free air locker to the first 20 callers!
Cranky
I have one fitted, it goes up front where the diesel one is...it mounts off the 2 spare holes in the head, and i ran an extra pulley off the water pump...sandwhiched it in there...they are beautiful to use....sorry no piccies...have a search on the net for Kelly Flemmings home page...
He has a few piccies on it.
Andrew
I have one fitted, it goes up front where the diesel one is...it mounts off the 2 spare holes in the head, and i ran an extra pulley off the water pump...sandwhiched it in there...they are beautiful to use....sorry no piccies...have a search on the net for Kelly Flemmings home page...
He has a few piccies on it.
Andrew
dow50r wrote:Mad Cruiser wrote:Got a couple pics of an on board compressor being mounted above the air cond compressor
Endless now mount the air pump below the sump and use 2 longer belts to run the fan/alt/presser off the crank...
Andrew
Have to look into that one.. might be the go...
I was thinking about bolting mine to those spare holes in the side of the head but that heater pipe is in the way..... I was going to build a bracket so that it sat out past that but I thought that the weight might be a bit much for those bolt holes....
crankycruiser wrote:dow50r wrote:Mad Cruiser wrote:Got a couple pics of an on board compressor being mounted above the air cond compressor
Endless now mount the air pump below the sump and use 2 longer belts to run the fan/alt/presser off the crank...
Andrew
Have to look into that one.. might be the go...
I was thinking about bolting mine to those spare holes in the side of the head but that heater pipe is in the way..... I was going to build a bracket so that it sat out past that but I thought that the weight might be a bit much for those bolt holes....
a piece of angle with a part missing fits to the head behind the heater pie, and 2 plates come off it at 90 degrese with holes in the ends to accept the compresser....its that easy ion the petrols...i was refering to the 1hz mounted uner the sump
Who is online
Users browsing this forum: No registered users and 1 guest