Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi RR newbie

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Hi RR newbie

Post by schuler »

Hi everyone, just wanted to introduce myself. Got an 86 Schuler Range Rover, with 308, 727, LT230 with ARB locker in rear running on dual fuel.

New to Rangies, i was a bit worried about the auto in the bush but gotta say it is great!!

Debut run was up Rocky track with 31" road tread and it was a walk in the park. I have driven it like i stole it to see if anything would break and touch wood it hasn't yet. It seems tougher than my old 40 series with 351 and 35's

Any way i damaged the engine a couple of weeks back so i'll probably do a bit of work to it then.

It does have a problem with the LT230, i cant shift from High range to low range with the engine running, it was like this when i bought it any ideas? The transfer is out of a manual Disco apparently installed by the RR place in Mitcham.

I look fwd to speaking to you.
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 124
Joined: Sat Oct 23, 2004 6:41 pm

Post by p76rangie »

Do you have the auto in neutral or park when you try changing to low range. It will not change without crunching otherwise.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

Welcome aboard. You should enjoy this site, plenty of good info:)

Intersting vehicle you have. I remember that Ritters used to do those conversion as well years ago and seen one down there when I was younger with my Dad when I used to live in Melbourne

Haven't broken anyhting yet, give it time. Keep an eye on those 'twiggs' that LR call axles :bad-words:

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

schuler,

welcome to OL, hope you enjoy the site.

You wil only be able to change ranges in either park, or neutral.

regards
Michael
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

Welcome to OL

Invest immediately in a spare rear axle set and a magnet on a 1m stick and go easy on the air locker with that 308, if you want to go over 33" tyres, budget for maxi drives.

Perhaps get some new HD axles and keep your old ones as spares

And have a ball :D
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Thanks for the welcome.

I think the tranfer is stuffed as it wont change in either Park or Neutral engine must be off. Hmmm...

Any way i'm sure i'll learn alot about these things in the near future

Thanks guys.

Cheers

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests