Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Painting over chrome plate

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Painting over chrome plate

Post by Guy »

whats the best way to get paint to stick and stay stuck to chrome ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

ive never heard of chrome being painted......i thnk you might be stuck with it being chrome..............unless you want to grind all the chrome off and start again........ :armsup:
Top
Posts: 96
Joined: Fri Nov 26, 2004 3:57 pm
Location: North of Clermont Qld

Post by 360 scout »

you can blast it with fine garnet, i use just small "snap on "speed blaster. use a good quality paint 2 pak or poly U ,make sure the whole area is roughed up paint will stick no worries.
TOYOTAS ARE LIKE TAMPONS!! every pussie has one!


Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Scout, I am interested in getting on of those speed blasters:

http://buy1.snapon.com/catalog/item.asp ... ir=catalog

Can you tell me how long the sand lasts in the 1L container, and do you use an enclosed cabinet? I have never used a sandblaster but I would find one very useful.
Top
Posts: 8
Joined: Mon Sep 13, 2004 7:55 pm
Location: Morisset Nsw

Contact:
Contact Cactus

Re: Painting over chrome plate

Post by Cactus »

love_mud wrote:whats the best way to get paint to stick and stay stuck to chrome ??


Most good auto-paint supply shops will sell an etch primer made just for this purpose (chrome + plastics etc) but like prev. msg's mention, you gotta rough it up
Top
Posts: 96
Joined: Fri Nov 26, 2004 3:57 pm
Location: North of Clermont Qld

Post by 360 scout »

grazza those speed blasters are bloody handy,bit slow on the big jobs but unreal on small brackets nuts bolts etc, container size isn't a worry air supply is ! I have 17cfm comp only just keeps up make sure air is dry& regulate at about 80 psi works better than 100 psi.
don't use sand doesn't work real good & bad for your health,buy proper stuff garnet for rust paint removal,& glass beads for satin finishing alloy.& make your own cabinet.so you can reuse it.
TOYOTAS ARE LIKE TAMPONS!! every pussie has one!


Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

that was the usd price you posted they are A$161.36 from snapon australia
www.overkill4x4.com
ph 94766137
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Thanks for the tips guys ..

will let you know how I get on ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

when bling goes bad :D


What parts are they that are getting painted as you may also find that engine enamel or a latex paint can work as well. Usually ok on parts that wont experience any wear.
Ransom note = demand + collage
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 123 guests