Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzuki Vitara 2.0L.....what to do to it

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 9
Joined: Mon Jan 17, 2005 10:48 am
Location: brisbane

Suzuki Vitara 2.0L.....what to do to it

Post by astrofix181 »

Hey there, i'm only new to this site, but i have a 1997 2.0L suzuki virata, it is all standard, i don't want to make it a full blown dirk racing truck, i just want i think 2inch spring lift, 2 inch body lift, and was wondering what size tyers that would let me fit, would be greatful for any hints. thanks.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Suzuki Vitara 2.0L.....what to do to it

Post by Guy »

astrofix181 wrote:Hey there, i'm only new to this site, but i have a 1997 2.0L suzuki virata, it is all standard, i don't want to make it a full blown dirk racing truck, i just want i think 2inch spring lift, 2 inch body lift, and was wondering what size tyers that would let me fit, would be greatful for any hints. thanks.


with a bit of trimming I belive that you can get a 235/80 ( I think) on there about a 33x10.5 ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 9
Joined: Mon Jan 17, 2005 10:48 am
Location: brisbane

Post by astrofix181 »

i'd rather not trim the body,
and any ideas for front and back tube bars would be great.
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Stevie G has experience with this car, speak to him.
Cooooooee, Steve you about?
Peter.
Top
User avatar
Ric
Posts: 302
Joined: Wed May 05, 2004 12:26 pm
Location: Brisbane

Post by Ric »

with 4" lift you can fit 31's, without cutting guards and stuff.

Ric
'07 ML Triton

12 tonne excavator for hire:0421 076 548
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

droopypete wrote:Stevie G has experience with this car, speak to him.
Cooooooee, Steve you about?
Peter.


He's on holidays



























Building :cool: schtuff in the shed, got the tour on Saturday, very :cool: ;)
yeshemesh
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Ric wrote:with 4" lift you can fit 31's, without cutting guards and stuff.

Ric


With a 3.5" lift you can get 33's, but you gotta cut lots...

Astrofix181, Overkill Engineering made my front and rear tube bars for me.
Top
Posts: 16
Joined: Tue Aug 03, 2004 11:11 am
Location: Wolverhampton England

Post by k44rll »

http://www.rocky-road.com/kickome.html
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 30 guests