i know that this has been talked about but i am stuffed if i can find the link to it. How many body blocks do i need for a dual cab lux, i thought that i read 12 some where but i wouldn't bet the farm on it.
Andrew
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body blocks
Moderators: toaddog, Elmo, DUDELUX
mate i did a 2" lift on a SC style side ute it was 6 blocks on the cab and 8 on the tray - i think.
I made the blocks, well got a mate to, just cut 50mm sections out of 50mmOD solid steel bar and drilled a 12mm hole in the centre. got 10mm OD bolts (grade 8.8 - high tensile) and the total came to $78 including the $50 cash for the mate to nick the stuf from work and cut it up etc in work time. plus the can of black kill rust.
Did it this way cause if i get done by the pigs i can get it approved (due to solid steel constrauction and 8.8 bolts - this is the accepted standard.)
These poly blocks work but will not usually be accepted by DOT. I think some states are accepting poly blocks that have been sleeved by steel both on the outside of the block and on the inside, stilll have to use grade 8.8 bolts to maintain the integtity of the sheer strength.
wow that was long
I made the blocks, well got a mate to, just cut 50mm sections out of 50mmOD solid steel bar and drilled a 12mm hole in the centre. got 10mm OD bolts (grade 8.8 - high tensile) and the total came to $78 including the $50 cash for the mate to nick the stuf from work and cut it up etc in work time. plus the can of black kill rust.
Did it this way cause if i get done by the pigs i can get it approved (due to solid steel constrauction and 8.8 bolts - this is the accepted standard.)
These poly blocks work but will not usually be accepted by DOT. I think some states are accepting poly blocks that have been sleeved by steel both on the outside of the block and on the inside, stilll have to use grade 8.8 bolts to maintain the integtity of the sheer strength.
wow that was long
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
On Tonka's reccommendation, I used Ultra High Molecular Weight Polyethelene. Got them engineered too. He said he prefferred aluminium but it was OK. (Lucky he didn't ask about crush tubes!!)
I used half 50mm and half 75mm diameter so the blocks were all the same size as the original mounts so I still have 1/2 a metre of both sizes if its any use to anyone. Just cut to size and drill out the middle (I got the holes done on a lathe cos I'm a fussy bastard)
I used half 50mm and half 75mm diameter so the blocks were all the same size as the original mounts so I still have 1/2 a metre of both sizes if its any use to anyone. Just cut to size and drill out the middle (I got the holes done on a lathe cos I'm a fussy bastard)
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Who is online
Users browsing this forum: No registered users and 95 guests