Hi,
Thinking of buying a jimny but not sure how easy they are to mod.
Can someone tell me if you can fit 33's under the guards with out to much drama? Aswell as what off the shelf mods are available?
Any pics of your Jimnys would be appreciated aswell.
thanks in advance,
MARC.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
jimny mods
Squik on this board has 32X10.5s with 4 inch springs and 3 inch body lift.
I'm not sure how much cutting was involved though, checkout www.jimnyworld.com
I'm not sure how much cutting was involved though, checkout www.jimnyworld.com
yeshemesh
marc, you need both body lift and spring lift to fit them (3+4). You will need to cut a wedge out of the guards (rear of front/front rear) about 8cm in width at the bottom narrowing at the top to about 20cm in length.
The metal guard is just folded back which covers the gap beteen body and flare you've just made.
The rear bumper will need to be trimmed - take about 5cm or 2cm below the indicators - and you will need to do the same for the front or fit a bar.
If you are going with 33's, make sure they are wider than 10.5 as there are stability issues onroad with anything narrower. Either that or wheel space them......you will probably need spacers or a better offset for anything wider than 11 so you don't foul anything.
Rockhopper series 1 is recommended fro anything up to 31's, you will need a series 3 or equivelant to run 32's and up....otherwise you will get blown off by motorised skateboards
Without any cutting, 235's will fit with only a 4" suspension lift, 30's with the tiniest amount of rubbing and 215's fit with a 2"suspension lift.
Photos at: http://community.webshots.com/scripts/e ... D=57563316
The metal guard is just folded back which covers the gap beteen body and flare you've just made.
The rear bumper will need to be trimmed - take about 5cm or 2cm below the indicators - and you will need to do the same for the front or fit a bar.
If you are going with 33's, make sure they are wider than 10.5 as there are stability issues onroad with anything narrower. Either that or wheel space them......you will probably need spacers or a better offset for anything wider than 11 so you don't foul anything.
Rockhopper series 1 is recommended fro anything up to 31's, you will need a series 3 or equivelant to run 32's and up....otherwise you will get blown off by motorised skateboards
Without any cutting, 235's will fit with only a 4" suspension lift, 30's with the tiniest amount of rubbing and 215's fit with a 2"suspension lift.
Photos at: http://community.webshots.com/scripts/e ... D=57563316
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
) or consider 31's 
Squik wrote:Photos at: http://community.webshots.com/scripts/e ... D=57563316
Think you need to redo the link as it is access is not happening due to us not being the owner
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
Joe @ 4play has a Jimmny !!
1.6 auto , lockers , winch , runs swampers (off road) 32",s (i think !!)
it was the test bed for a lot of ARB accessories !!
as he was working there , so it was accessible !!
(& he got to keep most of the gear !!)
1.6 auto , lockers , winch , runs swampers (off road) 32",s (i think !!)
it was the test bed for a lot of ARB accessories !!
as he was working there , so it was accessible !!
(& he got to keep most of the gear !!)
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
and one day i'll just become a worthless housewife.
if your planing on running 33's out lux diffs under there before you fork out for suspention lift and the like
i just done a rear axle i got same diffs(coily zook)
it doesnt like 33's
31's would be better
i just done a rear axle i got same diffs(coily zook)
it doesnt like 33's
31's would be better
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
Who is online
Users browsing this forum: No registered users and 0 guests