Well firstly spent all of yesterday trying to remove the leaf spring bolt, which was seized in place by the collar inside the factory bush, which I will bet has never been replaced - I ended up cutting that with an angle grinder.
Then the bolt joining the leaves together wouldn't fit through the hole in the spring seat, so I had to file that out, as I have minimal tools and didn't have a bit big enough to just drill through. (i.e. took ages)
Now I can't quite manage to locate the new bolt, the diff just doesn't want to come forwards enough, I'll sort it when the old boy gets home, but jeez, it's taken me two 1/2 days just to get one spring in, every bolt I touch is seized, and it's just basically a bugger of a job and I'm close to throwing in the towel on it... anyone got any advice to help me on the way with the other 3 springs I've got left?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I hate leafsprings!
Had the sane prob on mine but only the fixed end at the rear springs was siezed. Grinder is only way and BFH.
With the springs. I put the fixed end on first and then the shackle end. After that located the diff.
If ya doing it fri or sat. Gimme a buz as I got both off. Gotta go get my 1ltr case but thats all at moment. PM me for number
cheers
With the springs. I put the fixed end on first and then the shackle end. After that located the diff.
If ya doing it fri or sat. Gimme a buz as I got both off. Gotta go get my 1ltr case but thats all at moment. PM me for number
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
CRUSHU wrote:use bloody heaps of wd40 at 1/2 hour intervals tonight and tommorrow, before you start.
That has got to be the best advice I have heard in ages. Just lub it up heaps. And remember to lub it even more when you put it back in!
Don’t give up coz it will be worth it
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
it's all been doused in WD for about 3 days now, the collars over the bolt on the fixed end of the leaf was just rusted solid, I'll pop into bunnings on the way to work and stock up on cutting discs and maybe a bigger farkin hammer 
my two first cars were from the 60s so I learnt that lesson quick
Everything that needs to be is plenty covered in moly grease so at least I'll be right if I need to take em out
I'll stick with it cos my olds are kickin my arse to get it out of the garage
my two first cars were from the 60s so I learnt that lesson quick
Everything that needs to be is plenty covered in moly grease so at least I'll be right if I need to take em out
I'll stick with it cos my olds are kickin my arse to get it out of the garage
Last edited by OldGold on Thu Jan 20, 2005 7:10 pm, edited 2 times in total.
1. dont loose your cool and belt things you may want later ..
2. Beer (you need a little lubrication) also when your getting frustrated .. hop up and get a drink, have a smoke etc ... it's amazing what a little thought and a change of perspective can do for just suck probs.
3. Mates with good tools and willing to lend a hand in time of need are worth their weight in gold
4. Never seaze (or its like) when thing are going back together.
5. A small hand winch to pull the diff forward\backward
7. time to re-visit 1 and 2
8. I fergot what 8 was for ( to much wine and Jacks with dinner)
9. Angle grinder .. it it wont move, chop it off
10. Spare bolts
11. Make sure that the bolts in 10 are the right size and have locking nuts
12. Thats about it I think ..
Oh
13 .. try to enjoy getting to know your lil that much more intimately
Spelling Nazi's . blow me
.. I am drunk and dont care
2. Beer (you need a little lubrication) also when your getting frustrated .. hop up and get a drink, have a smoke etc ... it's amazing what a little thought and a change of perspective can do for just suck probs.
3. Mates with good tools and willing to lend a hand in time of need are worth their weight in gold
4. Never seaze (or its like) when thing are going back together.
5. A small hand winch to pull the diff forward\backward
7. time to re-visit 1 and 2
8. I fergot what 8 was for ( to much wine and Jacks with dinner)
9. Angle grinder .. it it wont move, chop it off
10. Spare bolts
11. Make sure that the bolts in 10 are the right size and have locking nuts
12. Thats about it I think ..
Oh
13 .. try to enjoy getting to know your lil that much more intimately
Spelling Nazi's . blow me
.. I am drunk and dont care " If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
You need to loosen both sides of the diff of and replace both sides together or you will have problems like your having were everything wont line up.If its driveable and your still having problems come down to my place and ill give you a hand to replace all your bolts with new ones and grease it all up i might have all the bolts you need just let me no what size and lenght
Duncan
Duncan
thanks a lot for your help guys
I'll loosen the side of the diff I've done off tomorrow and see how I go with the other side, I can see how that would help a lot. Really gunna get stuck into it tomorrow hopefully and get at least more than one spring done!
Also being very careful to keep everything as greased as I can on reassembly... unlike whoever did it last time
your advice is gold, love_mud... especially the beer and mates bit. thanks for the offer duncan but I think I should be right from here on in, even though I think it'll take me a while I'll get there in the end
I'll loosen the side of the diff I've done off tomorrow and see how I go with the other side, I can see how that would help a lot. Really gunna get stuck into it tomorrow hopefully and get at least more than one spring done!
Also being very careful to keep everything as greased as I can on reassembly... unlike whoever did it last time
your advice is gold, love_mud... especially the beer and mates bit. thanks for the offer duncan but I think I should be right from here on in, even though I think it'll take me a while I'll get there in the end
You do not have the required permissions to view the files attached to this post.
Rum on I shall!
Got the R/H side rear in today before work in an hour and a half, and that included jacking the car back up and 1/2 dissasembling the L/H side which took me 2 days to get together
Hopefully I'll get the fronts done tomorrow. The difference was loosening everything and letting the diff hang free on a trolley jack - a little good advice goes a long way, cheers guys 
Got the R/H side rear in today before work in an hour and a half, and that included jacking the car back up and 1/2 dissasembling the L/H side which took me 2 days to get together
Hopefully I'll get the fronts done tomorrow. The difference was loosening everything and letting the diff hang free on a trolley jack - a little good advice goes a long way, cheers guys 
Who is online
Users browsing this forum: No registered users and 0 guests