Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ/MK Height Question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2
Joined: Sun Jan 23, 2005 12:11 am

MQ/MK Height Question

Post by jasonx »

Hi guys,

I'm new to these forums. Looking at buying an MQ/MK as my first 4x4.

I've got a question in regards to the height of the vehicle with a 2" body lift and a 2" suspension lift with say 33" tyres.

Does anyone know how heigh this makes the vehicle? I just want to make sure it will pass through my garage before I go getting one.

Cheers
Jason
Posts: 146
Joined: Thu Oct 16, 2003 7:15 pm
Location: Hunter Valley

Post by muddyperils »

Jas, allow for ruffly 2 meters to the top of the fibroglass canopy. Thats why I built a car port....... :P
GQ TOURER
Thankful to be able to use the tracks that are left....SHEET where are they........
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Just get the standard hieght of the car. Minus half an inch for sag since new specs...

Then add 2 inches for body, 2 inches for suspension, and 1 inch for tyre.

I think at standard hieght in the book they are about 230mm high from the sill panel to the sill....

Not sure on hieght in total sorry

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

If it's any help, I am 199cm tall and I can see over the roof of an MK with 2" body lift and probably slightly sagged springs.

If you allow 2metres you should have no problems.
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

get one do the work you want and if it does not fit let the tyres down and drive in :lol: :lol:
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 2
Joined: Sun Jan 23, 2005 12:11 am

Post by jasonx »

Thanks guys,

If it doesn't fit I'll just let the tyres down drive through and pump them up again. I'm pretty close at two metres. Stupid arch.

Thanks for your help guys.
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

2 ez eh iam getting good at now :lol:
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Re: MQ/MK Height Question

Post by V8Patrol »

jasonx wrote:I just want to make sure it will pass through my garage before I go getting one.

Cheers
Jason

Why worry about putting it in the garage.......

If its like mine the engine never gets cold enought to warrant gararging !

Just drive it ! and park it on the nature strip :armsup:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Re: MQ/MK Height Question

Post by GOT MUD »

V8Patrol wrote:
jasonx wrote:I just want to make sure it will pass through my garage before I go getting one.

Cheers
Jason

Why worry about putting it in the garage.......

If its like mine the engine never gets cold enought to warrant gararging !

Just drive it ! and park it on the nature strip :armsup:
mine gets sheded cause i drive a truck for work which i bring home i dont need it to drive to work so if iam in my 4b iam going 4bing (or around to a mates house) :D
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

mine dont fit in my garage......... :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Screwy_ScrewBall wrote:mine dont fit in my garage......... :D


Gee I wonder why Screwy.

It didn't look that tall in the dark :rofl:

Mere
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MereMale wrote:
Screwy_ScrewBall wrote:mine dont fit in my garage......... :D


Gee I wonder why Screwy.

It didn't look that tall in the dark :rofl:

Mere

;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Post by Lawrence »

Post 84 - Pickup - 74.6"
Wagon - 72.6
Shorty - 74
89 gq dx. bone stock --- for now.
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Screwy_ScrewBall wrote:
MereMale wrote:
Screwy_ScrewBall wrote:mine dont fit in my garage......... :D


Gee I wonder why Screwy.

It didn't look that tall in the dark :rofl:

Mere

;)

Thats the same as saying mine dont fit in the garage, but i don have one. But i can say it doesnt fit under my carport :D
Its not cool, unless it's got boost :)
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Mark Costello wrote:
Screwy_ScrewBall wrote:
MereMale wrote:
Screwy_ScrewBall wrote:mine dont fit in my garage......... :D


Gee I wonder why Screwy.

It didn't look that tall in the dark :rofl:

Mere

;)

Thats the same as saying mine dont fit in the garage, but i don have one. But i can say it doesnt fit under my carport :D


I wont have this prob, as got it built large enuff to fit a caravan under :cool: :rofl:

Mere
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests