Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cruiser rear axle stud upgrade.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

cruiser rear axle stud upgrade.

Post by bazooked »

any 1 got the link for the 8 to 10 mm upgrade i cant find it.............. :x
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

PM dumbdunce
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

found it......
just wasnt sure about the tapperd cones as there is not much meat in the 75 series axles.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Just replace the original ones. If you renew them every
2 years you shouldn't have a problem and you'll always
have spares. That's what i did.
www.bolsys.com.au
Top
Posts: 510
Joined: Wed Sep 15, 2004 7:07 pm
Location: Pheasant Creek

Post by HEY CHARGER »

this might help a little bit,

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11856

also in jan 4wd monthly theres a bit of a spread.. page 197
Top
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

I do a mod to the hub - axel
there is not enough meat for strength using a 10mm stud .
i do a mod to axel and hub $60-00 a side (using your hub + axel)
i use std 8mm studs - std dowls.

i have all the jigs to do this mod .
i can supply new hubs and new axel .
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests