My new Mav has electric windows and I'm having trouble with the passenger side front window. It goes down fine but won't go up unless you pull it up. Any ideas what the problem is.
I tried searching but I didn't really find what I need.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mav Electric windows
Mav Electric windows
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
The runners wear out on them heaps.. they dont stay in the track going up then.
other issues, if its been rarely used, it could just have shitty contacts. rear ones are hideous for this, my left rear wont go up again now, gotta rip it apart.
theres a PLASTIC gear in there that usually strips too, if its making noise and going nowhere, then $1.00 says this is your issue..
other issues, if its been rarely used, it could just have shitty contacts. rear ones are hideous for this, my left rear wont go up again now, gotta rip it apart.
theres a PLASTIC gear in there that usually strips too, if its making noise and going nowhere, then $1.00 says this is your issue..
bogged wrote:The runners wear out on them heaps.. they dont stay in the track going up then.
other issues, if its been rarely used, it could just have shitty contacts. rear ones are hideous for this, my left rear wont go up again now, gotta rip it apart.
theres a PLASTIC gear in there that usually strips too, if its making noise and going nowhere, then $1.00 says this is your issue..
I don't think the runners are worn, all the other windows work fine. It is like it just doesn't have the grunt to lift it up by itself, it just needs a bit a hand. Will be pulling the trim off this week to have a closer look.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
hottiemonster wrote:whats happening with the mk? is that nice v8 going in the mav?
The MK is Getting a new gearbox and diffs
The Mav is a Turbo diesel and is going to be my tourer.[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Give the rubbers in the guides a lube with either silicon spray or Graphite powder. Never use any petroleum based lubes as they attract dust.
If that doesnt work the guides can sometimes be out if adjustment causing the window to kick sideways when it goes up. Worn regulators cause this too.
If that doesnt work the guides can sometimes be out if adjustment causing the window to kick sideways when it goes up. Worn regulators cause this too.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
Re: windows
Sir Rollsalot wrote:Replace the crappy plastic geary coggy thingy, they get stripped and become useless
would be interested to find somewhere that makes the gears in maybe brass? I think they would sell well!
Re: windows
bogged wrote:Sir Rollsalot wrote:Replace the crappy plastic geary coggy thingy, they get stripped and become useless
would be interested to find somewhere that makes the gears in maybe brass? I think they would sell well!
My passenger front is rooted
I pulled out the window mechanism and now cant see how I get to the little plastic cog
Ideas ? Pics would help !
Dont want to have to buy the whole mechanism
you have to buy the whole motor to replace the 20c cog, do what i did and get an engineer to copy the cog out of brass, mine has worked without poblem for nine years now, make sure you get at least two made at the same time tho 
to get to the cog you have to take motor out and on the face of it you will see a circlip, pop it off and you will get to it
to get to the cog you have to take motor out and on the face of it you will see a circlip, pop it off and you will get to it
GO THE MAV
xlt mwb xtracab fr locker wounnd up rear and now a 5ltr
xlt mwb xtracab fr locker wounnd up rear and now a 5ltr
some times if the left side window motor wont work from the left side switch the problem can be dirty contacts in the left switch on the drivers side main control panel silly i know but it happend to me .
also you can take the motor out of the back door and fit it in the front just to check if its the motor or not
also you can take the motor out of the back door and fit it in the front just to check if its the motor or not
2001 pathfinder tjm(nissan ) alloy b/bar hella 160 d/lights ARB h/light loom , ipf d/light loom GME TX3400 UHF , 2 power outlets in back
www.yarrawongamulwala.com.au
www.yarrawongamulwala.com.au
Who is online
Users browsing this forum: No registered users and 48 guests