Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rubber Grommets

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Rubber Grommets

Post by DaveS3 »

Does anyone know where to get rubber grommets like these?

They must have an internal diameter of 3 1/4 inches.

To suit 3'' exhaust tube for a snorkel

Image


Image

Thanks

Dave :D
Last edited by DaveS3 on Thu Jan 27, 2005 8:29 pm, edited 3 times in total.
Land Rover Discovery - GQ conversion underway
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

do you have CLARK RUBBER down that way if you do i would try them
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

muduppig wrote:do you have CLARK RUBBER down that way if you do i would try them


Yeh, they were useless :roll:

Have also tried Purple pig & Auto Rubber Joint.
All sell grommets but only to about 20mm.

Purple pig can order but in lots of 100, so they would probably be stuck with 98.

Dave :x
Land Rover Discovery - GQ conversion underway
Top
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Contact:
Contact mlowe76

Post by mlowe76 »

hi there


I have seen similar in electronics shops - maybe try jaycar electronics or similar


matt
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

Picked up some gromets the other day from super cheap, but not sure if they have the size your after, give em a buzz.
Yurich Design Services
www.yds.net.au
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

have u tried ringing tjm or arb head offices? i no my safri snorkle has one so ask ;)
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 82
Joined: Tue Nov 12, 2002 7:34 pm
Location: workin round the world

Post by wanna »

i got a rubber gromet simeler to that from the place i buy my truck part from
Dont be scared give it a go
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

This thread is nothing without pics!
Top
Posts: 96
Joined: Fri Nov 26, 2004 3:57 pm
Location: North of Clermont Qld

Post by 360 scout »

dave ,
you can buy an edging strip electricians use it, you just buy it in a long strip cut to lenth press it around the edge & hey presto instant grommet any size you want!
TOYOTAS ARE LIKE TAMPONS!! every pussie has one!


Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Repco.

These are used extensively in vehicle wiring.

Also try auto electricians.
Top
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

Post by GRINCH »

i tried almost every were trying to find some ended up getting some u shaped edgeing & super glued the joint, can't tell the difference
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests