Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey guys I need help with this urgently. Just need a response in this thread.. or just reply here.
recently the 10A fuse for my indicators keeps blowing. I've tried tracing the wiring as far back as I could but can't spot any shorts/cuts etc. I've tried disconnecting the plugs for all indicators and it still blows.
A mate of mine recommended that it might be the relay. Just wondering is this most liekly the problem? The first two fuses I went through, the indicators worked for 10 min or so of driving... but after that the fuse was blown as soon as I turned to ON.
This happens in my sierra a lot, usualy its a bad earth. My earth wires rattle lose, check them all to see if they are tight (especialy the one under the glovebox and on the firewall, l/h side where the loom comes through from in the car). Goodluck, hope this helps!
