Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ60 body lift dramas

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 53
Joined: Tue Mar 23, 2004 12:31 pm
Location: Coogee

FJ60 body lift dramas

Post by Coogee60 »

Hi all,
I'm having a few problems with my 60 after fitting a 2 inch body lift. As expected the transfer case lever was fouling the floor so I have cut an inch or so out with the angle grinder to compensate. I took it for a test run this morning and even though I am getting low range gearing, there is still no drive to the front wheels??? Yes, hubs are locked... There was a bit of a grinding noise when I first put it into low range (before I chopped the floor) so I am a bit worried that I have damaged something. Any info would be great, should I keep chopping for more clearance or should I take a different route and bend the lever instead?
Thanks.
Top
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

I like bending stuff
Something witty said by someone famous
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

maybe the vacuum hose has come off the transfer case..

i spent 12 months in 4high cause the auto lecky told me the
solenoid was bung... i finally looked at xmas to find the hose
unattached :bad-words:

i had no probs lifting my rocky...strange...
MULL
Top
Posts: 53
Joined: Tue Mar 23, 2004 12:31 pm
Location: Coogee

Post by Coogee60 »

Thanks, I'll check it out.
Top
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

Don't know what your problem is without seeing the car. I extended both levers by 50mm when I did my lift so it feels normal while driving.
Good luck, hope you find the problem.
Damian.

should I swim it first ?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 13 guests