Hi Steer Pitman Arms

Post by **suprasurf** » Tue Mar 25, 2003 4:56 pm

Wot is the shortest pitman arm you can get

Post by **hypo** » Tue Mar 25, 2003 11:15 pm

dunno but i run a 100 series one on mine

i can get measurements 2mora if u want

Post by **suprasurf** » Wed Mar 26, 2003 9:02 am

Cheers, a measurement would be kool

Post by **dumbdunce** » Wed Mar 26, 2003 6:19 pm

want me to measureize 60 and 70 (bundera) series ones? have one of each, spoze they're for sale.

Post by **suprasurf** » Wed Mar 26, 2003 6:51 pm

yep that would also help

measured an 80 series which is about 180mm between hole centres, looking for a real short one !!

Post by **hypo** » Wed Mar 26, 2003 7:03 pm

wot model 80 series coz if it is 95 or later it is the same as a 100 series arm. not sure wot the difference between the early and late model arms r tho.

Post by **suprasurf** » Wed Mar 26, 2003 7:10 pm

the one I measured was about 1990

Post by **hypo** » Wed Mar 26, 2003 7:18 pm

just measureed mine now dude and its bout 180mm between hole centres so maybe they r they same all thru the models or maybe the dude at the wreakers gave me the rong 1

Post by **CHAOS4X4** » Tue Apr 01, 2003 3:07 am

We use the IFS pitman arm as it is the shortest we know of and we sell the pitman arm and tierod adapter for $150...

Post by **hypo** » Wed Apr 02, 2003 6:53 am

lachlan do u have a pic of the IFS pitman arm and the adapter ?

Post by **bj on roids** » Wed Apr 02, 2003 8:42 am

the IFS arm does not wrk well with leaf sprung front ends

shorter by around 10mm over a 75 series pitman is the 40 series piman when used in the right way. the two shortest ones i can think of off-hand

hilux factory steering arm (too much drop though very short) should fit

daihatsu feroza = perfect

Post by **planb** » Mon Apr 07, 2003 5:15 pm

ifs pitman with adaptor

Outer Limits 4x4 Board

Hi Steer Pitman Arms

Hi Steer Pitman Arms

Who is online