Hi Guys!
Couple of questions for the technical gurus.
I have had to replace the power-steering pump on my 84 60 series (early model HJ60, 6 bolts pump). After finding the last pump in the whole of Brisbane at a wreckers, it turns out it doesn't work.
Questions:
1- I am not a mechanic but have followed all the procedures in the workshop manual to fit the pump and bleed the system, but still no power-steering. Is there anything anyone can think off apart from the pump not working?
2- Can a later model pump (4 bolts) be fitted instead of the older ones? They are more available 2nd hand or recond. I know they work at different pressures, would that be a problem and would there be other problems?
Any input welcome.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series power steering
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 71 guests