ok, so i've got the a-frame about to go in the back of the lux. also have h55f box and transfer with offset output shaft.
was going to use an ifs rear housing and axles. just to gain the width.
i beleive a bundy rear diff has an offset center and will accept the lux center. is it as wide as a ifs lux rear housing??? if it is, that would be perfect cos i would have better tailshaft anglesie not having to cross from centered diff to offset transfer.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
more diff width questions
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 3 guests