Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steel Pipe 90 degree bends

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Steel Pipe 90 degree bends

Post by dieseldude »

Where do you get steel tube 90 degree bends?

Am going to use these to make a replica ARB roof rack. I don't have access to a pipe bender so I figure this would be the next best step.

I need maybe 1 inch diameter pipe

In Brisbane are preferably.

Cheers
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

bends

Post by Pinball »

steel supplies... short radius or long available...

wherever you can source pipe, should get bends to suit..

would recommend black steel, galvanise later or powder coat..

Spock
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

That's be the go.

The round tube roof racks look better than the square ones I think.

Might try Gateway steel supplies.

Cheers
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 96
Joined: Fri Nov 26, 2004 3:57 pm
Location: North of Clermont Qld

Post by 360 scout »

their correct name is butt weld bends any steel suppies or irrigation joint.
TOYOTAS ARE LIKE TAMPONS!! every pussie has one!


Nitrous is like a hot chick with an STD...You know you want to hit it...Your just afraid of the consequences
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

porters engineering on the sunny coast has them. about $5 each for cast
short radius 1xdiameter long radius 2x diameter also have 3xdiameter bent pipe ($18 odd each)
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Google [Bot] and 3 guests