Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Air Con

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 22
Joined: Tue Nov 30, 2004 9:28 pm
Location: merimbula

Air Con

Post by Maverick »

If i was to buy a second hand air conditioner off a wreck, how hard would it be to fit and is there any things that i need to look for. any help with this would be great.



Maverick
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

If you are removing it yourself, take note (even write down instructions of dissassembly to aid re installation) of how and where everything goes. Go to a bank and get some coin bags to put nuts and bolts in, and be meticulous with the pen for the parts. Make sure you get every little nut, bolt, clamp, washer, switch, cable etc. Depends how mech minded you are, you will need to be careful with the seals etc on reinstall and get it recomissioned by a qualified auto fridgey. They will do a vacuum test to ensure no leaks.
Built, not bought.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

If it's a Feroza then there's an eletronic control module that fits near (above?) the glovebox - so make sure you get that. Plus you might need the extra aircon engine idle up solenoid for the inlet manifold - not sure if you'd already have it fitted??
David
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests