Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq drum to disc rear conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

gq drum to disc rear conversion

Post by dwaynes »

I have searched and found lots on mq/mk conversion but for the gq is it as simple as buying a complete rear diff disc to disc and swaping out or is the other major factors to look at

tia
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Plus master cylinder

Bazzle
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

disc...

Post by JemmyBubbles »

I yanked my drum rear housing out and whacked in a rear disc housing w/ factory locker... Which I would recommend if switching from disc to drum because you aquire not only disc brakes but a rear locker at the same time. This works out to be significantly less than purchasing a standard housing and whacking in an airlocker... but others may dissagree...

I didn't play with master cylinder though yet :? whats that all aboot bazzle.
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Just for the residual valve.. (If there is one , assumption only)

Bazzle
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

That was the plan find one that has the factory locker and do the change wont be for a few months yet but just want to be prepared.
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

I swapped mine straight over in my 89 model and still get the front wheels to lock up first, big improvement in brakes too, don't know if I'm going to bother with the master cylinder, there doesn't seem to be any balance issues even when braking hard, more likely to have problems due to rear load sensor adjustment I suppose, which I've never found a need to play with despite dropping 200-300kg of tray & chassis off the back.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 38
Joined: Mon Aug 30, 2004 3:27 pm
Location: sunshine coast

Post by extra niss »

i converted my 89 to disc brakes with the factory locker. put pads and rotors on it plugged the solenoids in ran two vaccum lines to rear and have not touched it since. and i have a good pedal no mater what i am driving in or on un like the drums where put your foot on the brakes and hope they are going to work.
did not touch master cylinder
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest