Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Holley + Snorkel
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Holley + Snorkel
I have a holley 2 barrel and am looking to attach a snorkel, any tips on how to go about this? Have thought about another aircleaner mount with solid sides, and an air horn, or the type of mount you can stick a "pod" on, leading to a donaldson type set up.??
Thonger
holley
i have been told that a 351 ford air cleaner will fit a 350 holley then just attach the pipe to it and the snorkel - haven't done it yet myself - in the to do list
the following is from another forum:
"You will need to get a factory holden or ford aircleaner housing , a 308 holden will fit, and cut part of the trumpet off so you are left with enough pipe to clamp a hose to."
Hope this helps
the following is from another forum:
"You will need to get a factory holden or ford aircleaner housing , a 308 holden will fit, and cut part of the trumpet off so you are left with enough pipe to clamp a hose to."
Hope this helps
You can get an aluminium hat for LPG and then fit a hose leading to a Donaldson Cyclopac type aircleaner. One off any 8-9 litre diesel Jap truck will do.
If you don't like that you could build a dual intake air hat and stick two Rover air cleaners to it and run dual snorkels, but that's getting complicated.
Or use the genuine Ford one, although I remember they don't fit Holleys all that well. Not as good an air cleaner as a Donaldson.
But then the Ford one won't stick out the side of the truck either.......
If you don't like that you could build a dual intake air hat and stick two Rover air cleaners to it and run dual snorkels, but that's getting complicated.
Or use the genuine Ford one, although I remember they don't fit Holleys all that well. Not as good an air cleaner as a Donaldson.
But then the Ford one won't stick out the side of the truck either.......
functionality does, but I wonder how air tight it would be.air cleaner
Or you could make your own like this one i made for a mate.
You do not have the required permissions to view the files attached to this post.
air hose
SMALL? its 75mm which is the same size as the outlet of the snorkle.J Top wrote:I would be very suspicious of the air flow capabilities of the small flexy hose coming off the chequer-plate air cleaner.
J Top
If it wre any bigger you would have to step it down to the snorkle.Who is online
Users browsing this forum: No registered users and 1 guest