Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Springs in the rear

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 295
Joined: Fri Dec 26, 2003 1:03 pm
Location: Townsville

Hilux Springs in the rear

Post by ca18escort »

Ok guys,
I have got a set of rear hilux spings sitting at home and I had a look at them. If I fit them up they should move the rear diff back about 7-8 inches from the look of it. I will use a 3/4 setup at the rear because the chasiss just isn't long enough. my question is Has anyone run these springs with the tub on the back or do you all do a ute conversion? It just looks like alot of cutting to clear the tyres. Also what do you do for a drive shaft for the rear? Will I have to go custom?

Cheers
Paul
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

there was one in the club who cut his guards with this setup of 3/4 with lux springs.

If it's a road driven car it would probably look more legal with a tray.

I think that bigsteve has some better pics.
You do not have the required permissions to view the files attached to this post.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 295
Joined: Fri Dec 26, 2003 1:03 pm
Location: Townsville

Post by ca18escort »

I see what you mean :twisted: :twisted:

I think that we might try the hilux fronts in the rear for a start and then later go to the rears. I don't want to get too far ahead of my ability with this thing because it will only end in tears.

Paul
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

ca18escort wrote:I see what you mean :twisted: :twisted:

I think that we might try the hilux fronts in the rear for a start and then later go to the rears. I don't want to get too far ahead of my ability with this thing because it will only end in tears.

Paul


Sensible :lol:

Do a detailed write up of this hey ;) The lux fronts are the same as the revered heep yj's so it will be mucho interesting :cool:
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

sierrajim wrote:there was one in the club who cut his guards with this setup of 3/4 with lux springs.

If it's a road driven car it would probably look more legal with a tray.

I think that bigsteve has some better pics.


keen to see some more details on this rig's suspension setup...
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

PM bigsteve he's got some more pics.

I'm actually going to pick up what's left of that car tomorrow.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

I've got more just loioking for them
You do not have the required permissions to view the files attached to this post.
yeshemesh
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

Can someone post up the lengths of the Hilux fronts, rears and IFS springs.

Cheers
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Wolverine wrote:Can someone post up the lengths of the Hilux fronts, rears and IFS springs.

Cheers


45"
48"
51"
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

Cheers!
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

did ya find any more steve?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

stumped wrote:did ya find any more steve?


Still looking,

I have about 4000 photo's to go through ;)
yeshemesh
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

bigsteve wrote:
stumped wrote:did ya find any more steve?


Still looking,

I have about 4000 photo's to go through ;)


so what's taking so long??? :D
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

stumped wrote:
bigsteve wrote:
stumped wrote:did ya find any more steve?


Still looking,

I have about 4000 photo's to go through ;)


so what's taking so long??? :D


Probly went up to the pub again for lunch :D
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

stumped wrote:
bigsteve wrote:
stumped wrote:did ya find any more steve?


Still looking,

I have about 4000 photo's to go through ;)


so what's taking so long??? :D


New job :cool:
yeshemesh
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

From what I hear big steve you are ignoring some of your jobs............How's the kitchen coming along :finger:

Oh and congrats with the job, I hope all goes well.
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

DeWsE wrote:From what I hear big steve you are ignoring some of your jobs............How's the kitchen coming along :finger:

Oh and congrats with the job, I hope all goes well.


The kitchen aint being neglected



































We did it on the kitchen bench last night ;)
yeshemesh
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

whats this i hear. Haven't you learnt thats what makes kids. must be a slow learner or a glutton for punishment.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 295
Joined: Fri Dec 26, 2003 1:03 pm
Location: Townsville

Post by ca18escort »

Back to the hilux spring thing. I will be fitting the hilux front this weekend to the rear because it is going to take alot of chopping to clear the tyres if I put the rear springs in with 3/4 setup.

Cheers
Paul

I will post up pics of it on the weekend.
1993 Triton V6 on the Build up.....not any more as I now have a Zook to play with.
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

bigsteve wrote:
DeWsE wrote:From what I hear big steve you are ignoring some of your jobs............How's the kitchen coming along :finger:

Oh and congrats with the job, I hope all goes well.


The kitchen aint being neglected

We did it on the kitchen bench last night ;)


tehehe

Sorry CA18escort for the hijack
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

just a question. do you need to modify the mounts to fit the hilux springs ? are they the same width? whats the length from eye to eye (in mm)
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

I know they are wider. 2.5" i think they are
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

more
You do not have the required permissions to view the files attached to this post.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

i cant seem to see the pics
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

nicbeer wrote:I know they are wider. 2.5" i think they are


2.36 if my memory serves me correct :lol:
zuks are 2"
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Ahh those weer the other shots i had.

In this case they didgeyed up the spring eyes i thing to fit sierra bushes in them (don't ask me how)
yeshemesh
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

I got more pics of that one if you want them.

I got them for the 3/4 setup.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

nicbeer wrote:I got more pics of that one if you want them.

I got them for the 3/4 setup.


post em up, seems relevant to the thread... if not can u email them?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

hows he go with axle wrap with the long half at the front?

seems as though it would wrap a fair bit :shock:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Email prob easier.

Pm your addy through
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests