Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
d.i.y beadlocks
Moderators: toaddog, TWISTY, V8Patrol, Moderators
d.i.y beadlocks
who on here has made their own bead locks? I am looking at making my own any info would be much appreciated!
Closest I've heard of anyone making thier own is getting someone to cut and weld the rims and outer ring and drilling/ bolting themselves. 
You need to be a bloody good welder cause a bit too much weld will shake the wheel too much and not enough will break the rim on a hard knock.
You need to be a bloody good welder cause a bit too much weld will shake the wheel too much and not enough will break the rim on a hard knock.http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Yeh ive made 4 sets so far half way through number 5 now .I cut out the rings with a cicle cutter on a oxy then weld all the rings together drill your bolt holes then bolt them together put them in a lathe machine the outside then inside diameters then set them up central on your rims tack weld in 4 spots then go to town with the welder all done very easy .
duncan wrote:Yeh ive made 4 sets so far half way through number 5 now .I cut out the rings with a cicle cutter on a oxy then weld all the rings together drill your bolt holes then bolt them together put them in a lathe machine the outside then inside diameters then set them up central on your rims tack weld in 4 spots then go to town with the welder all done very easy .
I wish it was as easy as you make it sound, but then i can't weld ... yet.
Re: d.i.y beadlocks
what about that Hick yank dude with his home made plasma cutter and shat, he was makin his own!
you can get the rings lazer cut quite easily. This (if you can draw on CAD) would probably be cheaper than buying the steel and drill bits to do them yourself.
I think that Cheezy may even sell the rings.
Or you can buy 6 stud beadlock rims from Canterbury wheel and tyre for under $300 per rim with a rolled edge lock ring and a ton of locking bolts, cant remember how many exactly.
I think that Cheezy may even sell the rings.
Or you can buy 6 stud beadlock rims from Canterbury wheel and tyre for under $300 per rim with a rolled edge lock ring and a ton of locking bolts, cant remember how many exactly.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Hoonz wrote:hahaha ... i saw some pics i think they were on pirate
some dood text screwed his tyres in BAHAHAHA
whats wrong with that, the speedway guys and drag racers have done this for years. You can by rims and the proper screws to use form many speed shops. Works a treat but is a bit of a pain to repair a puncture. Also seen guys use an adhesive to seal their beads with
Ransom note = demand + collage
show me pics of these drag racers with their tyres text screwed on!
yeh sicaflex to seal the beads on
... i don't use bead locks im a tight ass
yeh sicaflex to seal the beads on
... i don't use bead locks im a tight assH( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Hoonz wrote:show me pics of these drag racers with their tyres text screwed on!
yeh sicaflex to seal the beads on
allrighty then
http://www.mickeythompsontires.com/tech_rim_screw.html
Ransom note = demand + collage
yeh so its a designed system ... no booty fab there .... note they don't pierce all the way through the tyre
this doods got like 30mm screws going through his rim through the sidewall on his 4wd tyres
this doods got like 30mm screws going through his rim through the sidewall on his 4wd tyres
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
duncan wrote:Yeh ive made 4 sets so far half way through number 5 now .I cut out the rings with a cicle cutter on a oxy then weld all the rings together drill your bolt holes then bolt them together put them in a lathe machine the outside then inside diameters then set them up central on your rims tack weld in 4 spots then go to town with the welder all done very easy .
WoOt[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Re: reply
tuf045 wrote:yes i think that he did do that but not certain how lomg they would last, because they are designed for drag racers i think and they don't go round corners over rocks or anything like last
drag racers manage to spin the tyres on the rims. i have seen a couple of rigs in the US using the screws and they worked fine. The screw doesn't go into the sidewall only through the bead of the tyre so no air escapes.
Ransom note = demand + collage
Re: beadlox
tuf045 wrote:was loocking at the second air ones but if you bend the rim the air escapes. Could put a strengthing ring on the rim but if i go to that trouble i moswell put external beadlox on.
I will try and get some pics of my rims fitted with Second Air beadlocks. Trust me they dont leak even when the rim is bent. You wouldnt beleive it unless you looked at the condition of my rims. I have never had a bead loose air at any time. I run 4psi in the Rear and 6psi in the Front. I run the second airs at 45psi.
second air
Ruff thay would be great. It would be good to hear some good feed back about second airs.
so i take it thay you have never had any problems with them.
thanks for your time
so i take it thay you have never had any problems with them.
thanks for your time
The beadlocks dont leak as they have a tube inside of the nylon case.
The case simply "shapes" the innertube to place more pressure on the bead.
What does happen is the tube can deform around standard valve, this eventually leads to all sorts of balance issues.
Also the set I had for my 16x10's never really did the job, sure they would work fine while at low low pressures but the tyre still pulls away from the bead and allows dirt mud and crud in there. Once this happens they wont hold air at road pressure.
In the end I gave them away!
Sorry it wasn't positive, some people swear by them, the units for 8" rims may work better? I personally wouldn't touch them again.
The case simply "shapes" the innertube to place more pressure on the bead.
What does happen is the tube can deform around standard valve, this eventually leads to all sorts of balance issues.
Also the set I had for my 16x10's never really did the job, sure they would work fine while at low low pressures but the tyre still pulls away from the bead and allows dirt mud and crud in there. Once this happens they wont hold air at road pressure.
In the end I gave them away!
Sorry it wasn't positive, some people swear by them, the units for 8" rims may work better? I personally wouldn't touch them again.
Lifted, locked, loaded, reduced, rolled, and rowed
FZJ80, 1FZ-FE, A442F, 37's & 5.29's.
FZJ80, 1FZ-FE, A442F, 37's & 5.29's.
Ok i originaly bought these because they were going on my Hilux with the 38/12.5tsl's and it was going to be doing a bit of road work so wanted it less noticable when moving. Bolt on Beadlocks stand out wether moving or stopped. They drove ok on road even though they were never ballanced. My first impresions of them were they suck to install. Most places that have instaled one set wont install another set. Worst thing is that you realy dont ever know if they are installed correctly. Its only a guess. Now i have had them set up for a little over a year and they have prob been put through harder terrain than any other set ever have and they have caused me no trouble at all. The rims do cop a flogging though.
Would i buy them again. Prob not they were just a total pain to install. So much so that i have been running one of my tyres with 2 tubless tyre repair plugs hanging out of the sidewall after spiking a hole in it and i realy cant be bothered re doing the Beadlock. I also have a brand new spare and second Air that i have never installed on the rim because of the work involved.
Would i buy them again. Prob not they were just a total pain to install. So much so that i have been running one of my tyres with 2 tubless tyre repair plugs hanging out of the sidewall after spiking a hole in it and i realy cant be bothered re doing the Beadlock. I also have a brand new spare and second Air that i have never installed on the rim because of the work involved.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 121 guests