Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheap Flares

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Cheap Flares

Post by Mudzuki »

No, not the kind you buy at the op shop... but bunnings plastic is okay

I have an 88 WT Sierra, and the standard PLASTIC flares are not going to go close to covering the swampers.

I have searched for pics, but most of the threads are empty. The plastic flares hang down from the metal lip, so i cant screw into straight into this. Anybody gat any ideas of what can be done on the cheap?

Cheers
You do not have the required permissions to view the files attached to this post.
Top
Posts: 57
Joined: Tue Jul 06, 2004 9:16 am
Location: Armidale NSW

Contact:
Contact ashhash

Post by ashhash »

I bought some flare material from Clark Rubber.
Its cost $7.95 mtr and is about 50mm wide, looks pretty good too!
Ill post some pics of it this arvo.

Ash
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

try garden edgeing from bunnings ive been using it for years it is tough as nails but still flexes comes in 75mm or 150mm does not droop like ruber and can be cut to andy shape easely
P.E.T.A
People eating tasty animals.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

mine screwed straight in

it still works
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

redzook wrote:mine screwed straight in

it still works


Before or after the virtual lift?

I can see how you attached it in pic below, but the widest part of my plastic flares is vertical.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Mudzuki wrote:
redzook wrote:mine screwed straight in

it still works


Before or after the virtual lift?

I can see how you attached it in pic below, but the widest part of my plastic flares is vertical.


they fitted both times u just move the backin plate with the virtual lift

so there is always a lip there :)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

redzook wrote:
Mudzuki wrote:
redzook wrote:mine screwed straight in

it still works


Before or after the virtual lift?

I can see how you attached it in pic below, but the widest part of my plastic flares is vertical.


they fitted both times u just move the backin plate with the virtual lift

so there is always a lip there :)


Do you have a pic of it before the virtual lift, with the flares attached?

Cheers
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Mudzuki wrote:
redzook wrote:
Mudzuki wrote:
redzook wrote:mine screwed straight in

it still works


Before or after the virtual lift?

I can see how you attached it in pic below, but the widest part of my plastic flares is vertical.


they fitted both times u just move the backin plate with the virtual lift

so there is always a lip there :)


Do you have a pic of it before the virtual lift, with the flares attached?

Cheers


yeh u just posted it
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

redzook wrote:
Mudzuki wrote:
redzook wrote:
Mudzuki wrote:
redzook wrote:mine screwed straight in

it still works


Before or after the virtual lift?

I can see how you attached it in pic below, but the widest part of my plastic flares is vertical.


they fitted both times u just move the backin plate with the virtual lift

so there is always a lip there :)


Do you have a pic of it before the virtual lift, with the flares attached?

Cheers


yeh u just posted it
:oops: :oops: :oops: :oops: :oops:
Top
Posts: 100
Joined: Wed Jun 02, 2004 7:21 pm

Post by Toj0 »

Clarks rubber have several types and sizes, some have a horizontal lip that screws up, and some have a vertical lip. Ip to $17 / m
Tojo
96 coily with bits to replace the bits I knocked off
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests