your zooks looking smick as
nice flex
for the amount of weight on the vehicle (light)
daryl
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Project Goat - Build Up
zook build up
hey barathrum
your zooks looking smick as
nice flex
for the amount of weight on the vehicle (light)
daryl
your zooks looking smick as
nice flex
for the amount of weight on the vehicle (light)
daryl
Last edited by toysuzi on Sat Apr 02, 2005 7:29 pm, edited 1 time in total.
Small update.
Engine bolted in for the final time. New engine mounts and engine lowered slightly to avoid rubbing on the bonnent.
Front clip and body bolted down for final time.
Track bar nearly finished. Just have to weld on diff mounts.
Fuel system sorted and running. External electiric fuel pump is much better than the electric pump that used to be mounted in the sierra tank. The engine used to appear to starve for fuel,(maybe not enough pressure), now it just roars to life.
Still lots of little shyte to do.
Does anyone know what redline is for a Vitara 1.6 16v EFI? Does it have a rev limiter?
Engine bolted in for the final time. New engine mounts and engine lowered slightly to avoid rubbing on the bonnent.
Front clip and body bolted down for final time.
Track bar nearly finished. Just have to weld on diff mounts.
Fuel system sorted and running. External electiric fuel pump is much better than the electric pump that used to be mounted in the sierra tank. The engine used to appear to starve for fuel,(maybe not enough pressure), now it just roars to life.
Still lots of little shyte to do.
Does anyone know what redline is for a Vitara 1.6 16v EFI? Does it have a rev limiter?
Damo wrote:Barathrum wrote:Does anyone know what redline is for a Vitara 1.6 16v EFI? Does it have a rev limiter?
Yes they are rev limited. Not sure about the limit though, have never been lookin at the tach while puttin the boot inmy guess is 5.5k - 6.5k
cool. i'm happy that its limited. i guess i'll just have to bounce the limiter to find it
Damo wrote:Barathrum wrote:Does anyone know what redline is for a Vitara 1.6 16v EFI? Does it have a rev limiter?
Yes they are rev limited. Not sure about the limit though, have never been lookin at the tach while puttin the boot in
Sorry have I missed something, do you drive yours?????
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
DeWsE wrote:Damo wrote:Barathrum wrote:Does anyone know what redline is for a Vitara 1.6 16v EFI? Does it have a rev limiter?
Yes they are rev limited. Not sure about the limit though, have never been lookin at the tach while puttin the boot in
Sorry have I missed something, do you drive yours?????
Not lately, but yes.
hypolux wrote:did u build that tube clip or did it come from another rig ???
the tube clip came off the old M&M zook. it was cheaper and easier to get i second hand than to bother with building my own. i was originally gonna run the old front guards with some cutting, but the tube front came up for sale.
Barathrum wrote:hypolux wrote:did u build that tube clip or did it come from another rig ???
the tube clip came off the old M&M zook. it was cheaper and easier to get i second hand than to bother with building my own. i was originally gonna run the old front guards with some cutting, but the tube front came up for sale.
nice dude i thought it looked familiar
HYPOFAB Thanks to:
Polyperformance
Yuri 4x4
Longfield
Picked up my new brake lines today steel braided, with the length of the lines the braided will be heaps better, ,and only $75 each, custom length.
Finished making my track bar, with the help of a mate.
single link style. very happy with the way it works.
dumped the clutch at a few thousand rpm, no axle wrap just wheel spin
really happy with the compact design, it should allow me to drop me fuel tank a bit lower.
steel braided, with the length of the lines the braided will be heaps better, ,and only $75 each, custom length.
Finished making my track bar, with the help of a mate.
single link style. very happy with the way it works.
dumped the clutch at a few thousand rpm, no axle wrap just wheel spin
really happy with the compact design, it should allow me to drop me fuel tank a bit lower.You do not have the required permissions to view the files attached to this post.
Last edited by Barathrum on Tue Mar 08, 2005 10:11 pm, edited 1 time in total.
redzook wrote:cool work on the track bar even though it only has the one link i wouldnt call it a one link track bar. it is still gunna work the same as a 2 link track bar
yeah that was the idea, it was a fair bit of stuffing around to make it. But now that is in i'm really happy with it. hopefully it'll be strong enough.
Barathrum wrote:planb wrote:how long do you think that heim is going to last in bending ?
don't know. but i guess i'll find out. i can allways replace it every so often.
i still have to original heim in mine
so should last ages
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
nice work there mate, but as redzook said its a 2 link trac bar coz it has 2 mounting points on the diff 2 stop the rap.....
but yeah if it work then its all good.....
and also i dont think the spherical joint will flog out i had the same one on mine 4 like 18moths and its still good
but yeah if it work then its all good.....
and also i dont think the spherical joint will flog out i had the same one on mine 4 like 18moths and its still good
HYPOFAB Thanks to:
Polyperformance
Yuri 4x4
Longfield
hypolux wrote:nice work there mate, but as redzook said its a 2 link trac bar coz it has 2 mounting points on the diff 2 stop the rap.....
but yeah if it work then its all good.....
and also i dont think the spherical joint will flog out i had the same one on mine 4 like 18moths and its still good
yeah i'd probably call it a virtual two link, but don’t really know what its called. It has all benefits of a two link, but in a compact design that suited my centred diff really well. From side on if you were to draw a line from the bottom bracket back up to the hemi,(as if it was a two link) there is a fair size triangle created.
It works well in the driveway
MY45 wrote:planb wrote:how long do you think that heim is going to last in bending ?
Dont think it'll bend....ive been running mine for ages now with 37's on rock and had no worries.
im not bagging your truck, its looking good
my point is that heims are not suppose to be used in bending, they are designed for tension and compression loads. ive seen plenty of these fatigue and crack under bending loads.
luckily its just a track bar, coz if it snaps, your axle will stay where it is thanks to the leaf springs.
Who is online
Users browsing this forum: No registered users and 2 guests