Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bodylift
Moderators: toaddog, Elmo, DUDELUX
There is the fuel filler (not too sure on the extra cabs)
Steering rod loosen at the uni inside cab and/or at the box
Prob your radiator hoses Plus remove lower half of fan shroud
4wd and gearbox stick may have to be bent slightly
Watch steel lines just under the brake master cyl where they spiral they should just spread a little..
Watch induction hose air cleaner- manifold may stretch
If manual check clutch slave cyl hose may stretch
then adjust bullbar/bumper if needed
If i have forgotten anthing else i sure some1 on here will pick up on it
Steering rod loosen at the uni inside cab and/or at the box
Prob your radiator hoses Plus remove lower half of fan shroud
4wd and gearbox stick may have to be bent slightly
Watch steel lines just under the brake master cyl where they spiral they should just spread a little..
Watch induction hose air cleaner- manifold may stretch
If manual check clutch slave cyl hose may stretch
then adjust bullbar/bumper if needed
If i have forgotten anthing else i sure some1 on here will pick up on it
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
steering, I would loosen both ends and then after lift check if the shaft is long enough, some are some aren`t.
wires, check they aren`t to tight
little stick should be ok, gear stick normaly needs attending to
fuel lines, as they go from chassi mounted to body mounted then back to chassi mounted
handbrake cable, normaly needs one clip undoing, well thats all it needed on mine.
acclerator cable, maybe? I don`t know as mine has electric speedo so its just a wire
ummm thats all can think of for now that hasn`t been meantioned above.
wires, check they aren`t to tight
little stick should be ok, gear stick normaly needs attending to
fuel lines, as they go from chassi mounted to body mounted then back to chassi mounted
handbrake cable, normaly needs one clip undoing, well thats all it needed on mine.
acclerator cable, maybe? I don`t know as mine has electric speedo so its just a wire
ummm thats all can think of for now that hasn`t been meantioned above.
any news on problems with the 2000 xtra cab lift???
am doing one on mine this Sat, so would love to know any problems encountered before i do mine.
was a bitch finding the right length bolts in zinc or anything except black!! BUGGER!
will also let u know how goes it with mine, seems im another guinea pig!!
am doing one on mine this Sat, so would love to know any problems encountered before i do mine.
was a bitch finding the right length bolts in zinc or anything except black!! BUGGER!
will also let u know how goes it with mine, seems im another guinea pig!!
Who is online
Users browsing this forum: No registered users and 116 guests