I am curious as most of the stuff it would seem will line up.
Might take a measuring tape down to the wreckers tomorrow.
Has anyone attempted this swap before?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ interior in an MQ
hardly worth the hassle.
all the wiring and stuff is different for a start, the speedo cable and stuff wont line up either.....
the GQ gearbox tunnel is also wider. U would have to make custom brackets for all peices of the dash.....
but is spose doable if u feel that way inclined....
all the wiring and stuff is different for a start, the speedo cable and stuff wont line up either.....
the GQ gearbox tunnel is also wider. U would have to make custom brackets for all peices of the dash.....
but is spose doable if u feel that way inclined....
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
gq stuff
We put a gq dash into an mq, but we swapped the complete wiring harness.
Its best to use all the gq bits from under the dash.
What parts do you need?
Its best to use all the gq bits from under the dash.
What parts do you need?
Chop it drop it and big block it.
Who is online
Users browsing this forum: No registered users and 1 guest