NSW engineers

Post by **NICK** » Mon Apr 07, 2003 7:14 pm

i remember sometime looking at a page that listed all the NSW engineers, anyone have a link to that page?

NICK

Post by **spazbot** » Mon Apr 07, 2003 7:16 pm

http://www.rta.nsw.gov.au/registration/ ... /vsi15.pdf

Post by **NICK** » Mon Apr 07, 2003 7:21 pm

thanks son

Website · Post by **killalux** » Mon Apr 07, 2003 7:49 pm

is there a page with all the qld engineers?

Post by **cbr** » Mon Apr 07, 2003 7:55 pm

killalux wrote:is there a page with all the qld engineers?

What about WA Engineers??

Chris.

Post by **spazbot** » Mon Apr 07, 2003 8:01 pm

ceck your local motoring authority website

Post by **cbr** » Mon Apr 07, 2003 9:10 pm

spazbot wrote:ceck your local motoring authority website

Yea right obsolete sweet F.A. :mad:

Chris,

Post by **Slunnie** » Mon Apr 07, 2003 9:56 pm

Who are the good and reasonable engineers though? Any recommendations for work?

Post by **2MEKE** » Tue Apr 08, 2003 7:05 am

Slunnie wrote:Who are the good and reasonable engineers though? Any recommendations for work?

If you're in Sydney you might want to talk to Peter Gillard 9559-4822.

Post by **Midget** » Tue Apr 08, 2003 8:49 pm

If your on the central coast or newcastle, speak to Athol Mullen on 02 49 568 030.

Post by **Slunnie** » Tue Apr 08, 2003 8:59 pm

Thanks for those contacts. I spoke to 2 off the llist a while ago, and they didn't seem all that interested for various reasons.

Post by **Midget** » Tue Apr 08, 2003 9:17 pm

Athol does all my engineering on my rigs and my customers rigs.
If i have any questions on anything i just ring and he answers them.
Give him a call, he is pretty good with 4wd mods.

Post by **Slunnie** » Tue Apr 08, 2003 9:30 pm

That sounds cool.

I spoke to one fella about a suspension lift. The ADR's would give me 1/3rd metal to metal for lift which on a D2 shock is 70mm lift (std shock travel is 210mm). I wanted to go over 70mm and I was told that they needed to hire really expensive measuring equipment, hire a race track for a day to do the testing and analysis and then they had to write the report and it would probably cost around $3000. They could take that and shove it where........... I thought no. But I see so many vehicles around with huge lifts and I doubt they have gone through such testing (maybe I'm wrong), and I have never heard of anybody having this done. Anyway, I wont go offtopic. I'll give him a call - thanks for the contact though.

Post by **Midget** » Fri Apr 11, 2003 6:22 pm

Athol passed my 80 series with 6" coils,2" body lift and running 35" bfg muddies no probs.If my memory serves it cost me around $350.
Give him a call and have a chat. 02 49 568 030.

Outer Limits 4x4 Board

NSW engineers

NSW engineers

Who is online