I am looking for one to fit a '89 Sierra SWB.
Alternately, with a 2" bodylift there is space above the tank, how dificult is it to reposition the tank higher. And how much would this affect the COG?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fuel Tank Protection
Fuel Tank Protection
Does anyone have a template for a tank guard? I know I can get under there and measure up etc but why re-invent the wheel I am looking for one to fit a '89 Sierra SWB.
Alternately, with a 2" bodylift there is space above the tank, how dificult is it to reposition the tank higher. And how much would this affect the COG?
I am looking for one to fit a '89 Sierra SWB.
Alternately, with a 2" bodylift there is space above the tank, how dificult is it to reposition the tank higher. And how much would this affect the COG?
ive had two made up one for me and another to swap for parts. any sheet metal shop should be able to make one for you but they will need a tank to shape it off.
And b4 you ask im not a shop and i wont post you one. but can let you know where to get it made in hoppers crossing
And b4 you ask im not a shop and i wont post you one. but can let you know where to get it made in hoppers crossing
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
tank gaurd
i made one myself copied it off a mates made it out of 3mm m/s had a spare tank floating around to make the pattern off looks allright im a sheetmetal worker which made it even easier if you want me to make you one call benny at BENNITECH 4X4 49844805
There are no problems
Only solutions
Only solutions
Who is online
Users browsing this forum: No registered users and 0 guests