Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CAM & Head on a TB42?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

CAM & Head on a TB42?

Post by EricB »

Hi Guys

Just wondering if anyone has played around with CAMs and Head on a TB42?

Would I get any gains from a cam alone or is head work needed?

I havent heard of many people playing around with them.

Cheers
Eric
Top
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

Most cam mods that give you more power do it at higher revs, which is not realy what you want in a 4x4, you could go to a towing cam which will decrease power but increase lower end toruqe, prob not worth the hasel though
turbo deisel LWB, 2inch body, endless air, arb front and rear lockers, 34 JT2s, warn winch, carputer/GPS, working handbreak,
Top
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

berazafi wrote:Most cam mods that give you more power do it at higher revs, which is not realy what you want in a 4x4, you could go to a towing cam which will decrease power but increase lower end toruqe, prob not worth the hasel though


True, probably not worth the effort then.
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

I gaurantee you there will be a cam that will increase power and torque at all rev ranges more than the stock one. Head work, if done properly, will also give you gains everywhere. It's not a matter of bigger is better for either mod, but how it's done. I'd give it a shot if you plan on taking motor out. No point doing any mods on a tired motor though.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest