Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Barred up

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Barred up

Post by Toos »

Made up some sliders and a rear bar cost about $80 all up. Let me know what you think.
You do not have the required permissions to view the files attached to this post.
4 Pot Screama
Top
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

Forgot the pic of the sliders.
You do not have the required permissions to view the files attached to this post.
4 Pot Screama
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

look sweet. Got any pics on how you mounted and made the sliders? I like the rear bar, are they led lights?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

sliders look good, why did you change the rear bar?
Top
Posts: 351
Joined: Fri Aug 13, 2004 9:47 am
Location: Canberra

Post by DiddyZook »

Toos, they look great. $80 is cheap, had I seen them in a catalogue with a bigger price I would not have been surprised. The new lights in the rear bar must have contributed a bit to the price.

Same as nicbeer asked, please show some photos of how you have mounted these. Is that a tow coupling in the centre of the rear bar?
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Looks good, nice and different with that rear bar :D
Top
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

The led's cost $60. Igot the steel for free. The bar is a lot stronger than oe and can use my hi-lift on any of the three points in the bar and the middle one doubles as a recovery point. the bar is mounted to the same points you'd mount a towbar on and the sliders bolt to the outriggers on the chassis.
You do not have the required permissions to view the files attached to this post.
4 Pot Screama
Top
Posts: 62
Joined: Wed Feb 16, 2005 10:42 am
Location: USA new jersey

Contact:
Contact wildchild1066

Post by wildchild1066 »

looks good
GOING THE DISTANCE
[img]http://i7.photobucket.com/albums/y300/wildchild1066/DSC00759SmallCustom.jpg[/img]
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

Toos wrote:The led's cost $60. Igot the steel for free. The bar is a lot stronger than oe and can use my hi-lift on any of the three points in the bar and the middle one doubles as a recovery point. the bar is mounted to the same points you'd mount a towbar on and the sliders bolt to the outriggers on the chassis.


The LED's cost what???... is that total for all?... best price i got so far has been 140 odd each....
Top
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

$60 from a truck spares shop in townsville.
4 Pot Screama
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

tville spares

Post by Pinball »

This was for all lights or 60 each?...

what brand, which shop?

Am in middle of doin new rear bar meself so lighting replacement required..

Spock
Top
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

$10 each from Tony truck spares the lights are baxters
4 Pot Screama
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Toos wrote:$10 each from Tony truck spares the lights are baxters


Thats damn cheap for LEDS
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

blow me

Post by Pinball »

That is sax on legs m8....

neat lookin barwork... and have just talked to Tony's... they have wild LED pricing..

You got me hot.. they just finished it off.....

Spock
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 89 guests