Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
headers/exhaustr on Fj79 1fz-FE engine
Moderators: toaddog, Elmo, DUDELUX
headers/exhaustr on Fj79 1fz-FE engine
Hi i just bought a 2005 landcruiser pick up here in Dubai, U.A.E. with a petrol engine I would like to know who makes good headers for this vehicles, thanks for your help I posted this in the main forum too.
Hi Phil
I think ive given you some bad info....APS will sell a kit to you if you can find 24 others willing to buy aswell...and im fairly sure the kit is for the 100 series or 80 series, not fzj79.
You have the option of making a system up using a water cooled aftercooler which is not very big at all. (check out the archives on www.lcool.org) Ive been told another 0zy company makes turbo systems for your motor now, but cant remember the name at the moment....
With the headers question, i had a set on my 1fzfe, and they do free the motor up at revs, and give you better economy, i believe they are Hurricane brand. If you have a look where the two header pipes meet together, they are both squashed there to fit into the larger pipe....i would suggest you have an exhaust place cut out that part of the header and rejoining in a descent fashion , either there or further towards the drivers seat area....the longer you make it, the better low down the torque is apparently. The extracters met right back there about 4 inches from the flange joint back there, and the muffler that is there in oz is not used.
You guys may have a cat converter there (or 2) to contend with.
I think ive given you some bad info....APS will sell a kit to you if you can find 24 others willing to buy aswell...and im fairly sure the kit is for the 100 series or 80 series, not fzj79.
You have the option of making a system up using a water cooled aftercooler which is not very big at all. (check out the archives on www.lcool.org) Ive been told another 0zy company makes turbo systems for your motor now, but cant remember the name at the moment....
With the headers question, i had a set on my 1fzfe, and they do free the motor up at revs, and give you better economy, i believe they are Hurricane brand. If you have a look where the two header pipes meet together, they are both squashed there to fit into the larger pipe....i would suggest you have an exhaust place cut out that part of the header and rejoining in a descent fashion , either there or further towards the drivers seat area....the longer you make it, the better low down the torque is apparently. The extracters met right back there about 4 inches from the flange joint back there, and the muffler that is there in oz is not used.
You guys may have a cat converter there (or 2) to contend with.
Who is online
Users browsing this forum: No registered users and 0 guests