Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

radiator overflow bottle,

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

radiator overflow bottle,

Post by ozy1 »

im in the need for one of these as mine has alot of cracks starting, and i wanna replace it before the leaks bad,

ive been lookin on ebay, and they dont seem to be listed anymore, anone have details where to get em for the advertised $60 they were chargin, nissan are too expensive.

thanks in advance

PS for a GQ
Last edited by ozy1 on Sun Feb 20, 2005 2:08 pm, edited 1 time in total.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

You dont have to use a proper over flow container, you can use any container you want. When i worked at eastern creek raceway people were using coke bottles or anything they could get there hands one. All it has to do is stop the over flow onto the road. Just a sussgestion. :roll:
Its not cool, unless it's got boost :)
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ive thought of that, as i have used aftermarket options before, but, becasue of all the gear in the engine bay, its a bit tight, so i really want to use a factory style item.

thanks anway
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Ron Hall 4x4 in Bayswater Melb has them new.
or call him and he will post one to you.
. Trya 4x4 wrecker in your area.


Bazzle
Top
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

Mine was $5 from a wrecker, in perfect condition.
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

I just rebuilt the lid with Silastic :D
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Epoxy resin holds mine and the spare together good... dries clear so seeing the water level is easy

:D
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: radiator overflow bottle,

Post by bogged »

ozy1 wrote:im in the need for one of these as mine has alot of cracks starting, and i wanna replace it before the leaks bad,

ive been lookin on ebay, and they dont seem to be listed anymore, anone have details where to get em for the advertised $60 they were chargin, nissan are too expensive.


This is the seller.
http://search.ebay.com.au/_W0QQsassZkjsri


Image
is the item
Top
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

These are a tiawanese non genuine part. They're probably made of better material than the Nissan part.

Local 4x4 parts store sells them for $55.

I fixed mine with fibreglass resin.
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

bazzle wrote:Ron Hall 4x4 in Bayswater Melb has them new.
or call him and he will post one to you.
. Trya 4x4 wrecker in your area.


Bazzle
does anyone have contact detail for this place please?
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

ozy1 wrote:
bazzle wrote:Ron Hall 4x4 in Bayswater Melb has them new.
or call him and he will post one to you.
. Trya 4x4 wrecker in your area.


Bazzle
does anyone have contact detail for this place please?
HALL 4X4 SALVAGE
1 Barry St,
Bayswater,
Vic. 3153
Phone (03) 9729 7566
Fax (03) 9738 1392
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

thankyou verry much
Top
Posts: 49
Joined: Wed Jan 21, 2004 8:48 pm
Location: Swan Hill Vic

Post by 92shorty »

Not too sure how long it will last but I've just made one out of 90mm stormwater pipe. Cut a short length, caped each end and put a 'T' piece in the middle with a screw top lid. Cost about $6. For that amount I don't care if I have to replace it every 12 months

cheers George
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
Top
Posts: 49
Joined: Wed Jan 21, 2004 8:48 pm
Location: Swan Hill Vic

Post by 92shorty »

Not too sure how long it will last but I've just made one out of 90mm stormwater pipe. Cut a short length, caped each end and put a 'T' piece in the middle with a screw top lid. Cost about $6. For that amount I don't care if I have to replace it every 12 months

cheers George
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

but the thing is, i have an ARB battery tray in there, so it needs to be the same size as factory, as i have no other room, plus i ordered 2 the other day
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ozy1 wrote:but the thing is, i have an ARB battery tray in there, so it needs to be the same size as factory, as i have no other room, plus i ordered 2 the other day

I have the Piranha Tray in mine, similar to ARB, adn the one off Ebay fits mine ok.. You should have no probs.
if your that worried buy a new Nissan one
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

Bogged, i was acvtually replyin to the post above mine with the idea to make one from 90mm PVC pipe,
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ozy1 wrote:Bogged, i was acvtually replyin to the post above mine with the idea to make one from 90mm PVC pipe,
apologies :oops: :oops:
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

bogged wrote:
ozy1 wrote:Bogged, i was acvtually replyin to the post above mine with the idea to make one from 90mm PVC pipe,
apologies :oops: :oops:
no dramas, i just forgot to quote it, i should have mine in the next few days, cant wait. :P
Top
Posts: 49
Joined: Wed Jan 21, 2004 8:48 pm
Location: Swan Hill Vic

Post by 92shorty »

but the thing is, i have an ARB battery tray in there, so it needs to be the same size as factory, as i have no other room, plus i ordered 2 the other day
I've also got the ARB battery tray. It's a tight fit but it will fit.

George
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

92shorty wrote:
but the thing is, i have an ARB battery tray in there, so it needs to be the same size as factory, as i have no other room, plus i ordered 2 the other day
I've also got the ARB battery tray. It's a tight fit but it will fit.

George
thanks anyway, i purchased my new overflow bottles and fitted them this week end, perfect fit, and no dramas.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 9 guests